Dell P318S User Manual page 35

Projector Status
Lamp driver breakdown
Color Wheel breakdown
Lamp failure
Fault - DC supply (+12V)
Lamp module connection
failed
Description
If the problem persists,
contact Dell.
The lamp driver has failed.
The projector
automatically shuts down.
Unplug the power cord
after three minutes and
then turn the display on
again. If this problem
persists, contact Dell.
Color wheel cannot start.
The projector has failed
and the projector
automatically shuts down.
Unplug the power cord
after three minutes and
then turn on the
projector. If this problem
persists, contact Dell.
Lamp is defective.
Replace the lamp.
Power supply has been
interrupted. The projector
automatically shuts down.
Unplug the power cord
after three minutes and
then turn on the
projector. If this problem
persists, contact Dell.
Lamp module connection
may be disrupted. Check
the lamp module and
ensure that it is properly
installed. If the problem
persists, contact Dell.
Power
AMBER Flashing
White
OFF
AMBER Flashing
OFF
Indicator
OFF
AMBER Flashing
OFF
AMBER
OFF
AMBER Flashing
AMBER Flashing
AMBER
AMBER
AMBER Flashing
Guiding Signals 35