REDVERZ HAWK II Setup Instructions

HaWk II eXpeDITIon TenT - set UP InstRUCtIons
Your Hawk II expedition Tent is easy to pitch and maintain. follow these instructions to set
up your tent quickly, safely and easily. In order to familiarize yourself with your new tent,
we suggest that you test pitch it before setting off on an expedition.
• Find a site that is even, protected from the wind and without any sharp objects.
• Remove any sharp rocks or sticks that can damage your tent floor.
• Avoid hollow spots where rain water can gather.
• Use a footprint, sold separately, to protect your inner tent from ground moisture,
dirt and sharp objects.
1
2
3
WWW.reDverz.com

Unpack TenT

Contents:
•
Inner tent & outer tent (arrive already clipped together)
•
Pole Bag (3 tent Poles)
•
stake Bag

Unroll TenT

Clear area of sticks and rocks under tent. Unroll tent and align doors to
your choosing. Leave the tent free, do not stake at this point. set up
and inserting poles is easier if the tent is not staked down at this stage.
remove THe 3 poles from THe pole bag
Assemble the Poles. Carefully unfold the shock corded sections and
allow them to slide together. Do not snap the pole sections together,
this will damage the poles. Make certain that the insert of each pole
section is fully inserted into the next section. Failure to do so may
cause your poles to crack.
+1 720 213 8287
DesIGneD In DenVeR, CoLoRADo