Table of Contents
Advertisement
Quick Links
SOLO EXPEDITION TENT - SET UP INSTRUCTIONS
Your Solo Expedition Tent is easy to pitch and maintain. Follow these instructions to set
up your tent quickly, safely and easily. In order to familiarize yourself with your new tent,
we suggest that you test pitch it before setting off on an expedition.
•
Find a site that is even, protected from the wind and without any sharp objects.
•
Remove any sharp rocks or sticks that can damage your tent floor.
•
Avoid hollow spots where rain water can gather.
•
Use a footprint, sold separately, to protect your inner tent from ground moisture,
dirt and sharp objects.
1
2
3
WWW.REDVERZ.COM
UNPACK TENT
CONTENTS:
•
Inner Tent & Outer Tent (arrive already clipped together)
•
Pole Bag (2 Tent Poles)
•
Stake Bag
UNROLL TENT
Stake end marked 'SOLO', one stake in each of the 4 black
webbing straps.
REMOVE THE 2 POLES FROM THE POLE BAG
Assemble the Poles. Carefully unfold the shock corded sections and
allow them to slide together. Do not snap the pole sections together,
this will damage the poles. Make certain that the insert of each pole
section is fully inserted into the next section. Failure to do so may
cause your poles to crack.
+1 720 213 8287
DESIGNED IN DENVER, COLORADO
Advertisement
Table of Contents
Related Manuals for REDVERZ SOLO EXPEDITION
Summary of Contents for REDVERZ SOLO EXPEDITION
- Page 1 SOLO EXPEDITION TENT - SET UP INSTRUCTIONS Your Solo Expedition Tent is easy to pitch and maintain. Follow these instructions to set up your tent quickly, safely and easily. In order to familiarize yourself with your new tent, we suggest that you test pitch it before setting off on an expedition.
- Page 2 MATCH POLES Pole colors correspond to the appropriate colored pole loop. Red poles slide into sleeves with red tabs. The Solo Expedition Tent poles are identical and interchangeable. INSERT POLES Gently slide each pole through the sleeve, and insert the pole tip into the grommet.
Need help?
Do you have a question about the SOLO EXPEDITION and is the answer not in the manual?
Questions and answers