ezManager
Introduction
This set-up menu will be invoked when it is turned on first time or user selects Factory Reset of main
menu .
If TV fails to set up and turn it off, TV will show failure message and run installation again on next
power-cycle .
Pro:Centric Auto
y Image shown may differ from your TV .
WELCOME
Please select the Mode .
Pro:Centric Auto
pro:centric auto
Pro:Centric Manual
USB Clonning
Non Pro:Centric
1
Use the
button to select the Pro:Centric Auto .
2
Use the oK button and then
Auto Installation
Processing Pro:Centric Configuration .
Step 2 may take up to 30 min(s) .
Step 1 searching for the network type
Step 2 searching for the server setting
Step 3 searching for the platform type
Step 4 downloading HCAP files
Step 5 downloading EZI files
Step 6 saving the Configuration
Do not unplug power and signal cables .
button to select Pro:Centric Auto .
Please wait . . .
10%
:
RF
:
In progress
:
:
:
:
5