Table of Contents
Advertisement
www.seagate.com
7. Insert the FireCuda SSD with the pinside going into the M.2 slot and the label side facing the top at a 30
degree angle.
Figure 3 Seagate M.2 SSD in the M.2 Slot
8. Press the SSD down and mount it above the screw slot of the motherboard and fasten the screws.
9. Follow your computer or motherboard manufacturer's instructions to install integrated heat sink if
available.
10. Close the case or cabinet and reassemble your computer.
11. Power on your computer.
12. Start installing the Operating System on the FireCuda SSD if you want to use it as the primary drive.
SeaTools
SeaTools™ SSD GUI is a free software from Seagate that monitors health, tests, and analyses drives. It is
completely data safe and easily installs on your system. You can use SeaTools in your FireCuda SSD for:
Health Monitoring
Drive Maintenance
Drive Status
Test
More information and SeaTools documentation are here:
https://www.seagate.com/in/en/support/downloads/seatools
Seagate FireCuda PCIe NVMe M.2 SSD Installation Guide
6
Advertisement
Table of Contents
