Advertisement

Important safety instructions! Please read before connection!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: To prevent the risk of electric shock, do
not open the unit under any circumstances.
Refer all maintenance and repair work to a qualified
workshop or contact your dealer.
The lightning flash symbol warns the user
of uninsulated voltage and the risk of
electric shock.
The exclamation point symbol alerts the
user to important maintenance and
operating instructions in the instruction
manual.
Suitable for indoor use only
Read operating instructions
This symbol defines the minimum distance
of the object to be illuminated.
For environmental reasons, please recycle the
packaging correctly.
A new product can sometimes lead to unwanted odours
or to minimal smoke development for a short period of
time. This reaction is normal and disappears after a few
minutes.
The unit is intended for indoor use only (IP20)! Please
use the device only in a dry environment. Keep the unit
away from rain, moisture, direct heat and dust.
In order to avoid condensation in the device, the device
should adapt to the ambient temperature before start-
up.
Please place the device in a well ventilated place, out of
the reach of flammable materials or liquids.
Do not cover any ventilation openings as this may
result in overheating.
Please disconnect the power plug if the unit is not to be
used for a long period of time or if maintenance work is
to be carried out.
The device is designed for a maximum ambient
temperature of 40° Celsius.
The device should not be installed by inexperienced
persons and must be installed in compliance with the
mechanical and electrical safety regulations in your
country.
If the power cord is damaged, it must be replaced
immediately with an original spare part from the
manufacturer.
Make sure that the mains voltage is not higher than the
voltage indicated on the housing.
In case of a malfunction of the device, please contact your
dealer and stop the operation of the device immediately.
A minimum distance of 1m to flammable materials or
liquids must be maintained.
OVERHEAD MOUNTING
The installation may only be carried out by qualified
personnel. Improper installation can cause serious injury
and damage. Observe the load limits of the selected
installation position.
Make sure that there are no unauthorized persons
underneath the device during assembly or
disassembly/maintenance.
Producer: MUSIC STORE professional GmbH,
Istanbulstraße 22-26, 51103 Cologne, Germany

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vector Fog 1.5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Lightmaxx Vector Fog 1.5

  • Page 1 Important safety instructions! Please read before connection!  The device is designed for a maximum ambient RISK OF ELECTRIC SHOCK temperature of 40° Celsius. DO NOT OPEN   The device should not be installed by inexperienced ATTENTION: To prevent the risk of electric shock, do persons and must be installed in compliance with the not open the unit under any circumstances.
  • Page 2: Intended Use

    Manual Intended use: The product LightmaXX Vector Fog 1.5 is used exclusively for the generation of artificial fog by vaporizing the filled fog fume. The device may only be used for this purpose and in accordance with the operating instructions. Other purposes as well as operation under other operating conditions are expressly not intended and can lead to damage to property or personal injury! No liability is assumed for damage resulting from improper use.
  • Page 3: Safety Instructions

    ENGLISH Safety instructions: DANGER! (For babies and children) Packaging, plastic films and other packaging materials must be properly stored or disposed of. They must be kept out of the reach of babies and children due to the risk of suffocation. Make sure that children never use the device unattended! In addition, make sure that children do not remove any (small) parts from the device, as they could suffocate by swallowing them!
  • Page 4: Installation

    ENGLISH Installation: Be sure to check the unit for damage before using it. Optimally, use the original packaging or suitable transport or storage packaging to protect the product from dust, moisture, etc. when not in use. The unit can be installed upright or suspended. The device must always be attached to a solid, approved carrier or a suitable surface.
  • Page 5: Remote Control

    Resistance 120 ohm // 1/4w between pin 2 (DMX-) and pin 3 (DMX+) of the last fixture. Operating mode: The LightmaXX Vector Fog 1.5 can be operated in 1 channel mode. Please connect the fog machine to your DMX controller/interface. The connection is made via a 3-pin DMX cable with XLR connectors.
  • Page 6 ENGLISH Channel Value Function 000-005 1-100% FOG OUTPUT 006-255 Connections and controlls: Description Description Fluid tank ON/OFF switch Tank cap Fuse Mounting bracket Power cord Locking screw Control Panel Carrying handle DMX in-/output (3 pin) Tank indicator Receiver remote control Nozzle for fog output...
  • Page 7: Specifications

    ENGLISH Specifications: Model Vector Fog 1.5 Power supply AC 220-240V 50Hz Power consumption 1500 Watt Power connections PowerCon compatible Heating time approx. 3,5 min Fluid consumption max. 350 ml/min Tank 2,5 Liter Output range approx. 6 m DMX connector 3 pin...
  • Page 8: Environmental Protection

    Never clean the device wet! Ventilation grilles and openings should always be cleaned of dust and dirt. Compressed air sprays are ideal for this application. In addition, regular cleaning of the lines and nozzles is strongly recommended, e.g. with LightmaXX cleaning fluid (LIG0010221-000/250 ml). Please use only high quality cleaning fluids! Environmental protection: The company MUSIC STORE professional GmbH always strives to reduce the burden of packaging to a minimum.
  • Page 9 ENGLISH Notes MS ID: LIG0015924-000 01/2019...

This manual is also suitable for:

Lig0015924-000

Table of Contents