Troubleshooting - Ryobi RYAC700 Operator's Manual

IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.
PROBLEM
Motor fails to start when switch trigger
is depressed.
Motor runs but tines do not move.
This product has a Five-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com

TROUBLESHOOTING

POSSIBLE CAUSE
Power cord is not plugged in or
connection is loose.
Household circuit breaker is tripped.
Gear train failure.
MAKE THE MOST OF YOUR PURCHASE!
Go to http://register.ryobitools.com and register your new tool on-line.
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
For any questions about operating or maintaining
your product, call the RYOBI Help Line!
or call (toll free) 1-800-860-4050.
12 — English
SOLUTION
Plug in the power cord.
Check circuit breaker.
Take unit to authorized service center.