Introduction & Disclaimer - Nemtek Druid 28LCD Manual

Networking with energizers and smartcards
Table of Contents

Advertisement

Introduction & disclaimer
INTRODUCTION
The Nemtek Smart IO Card can be networked with a Druid 25 or Druid 28 electric fence
energizer or with an 8-way Relay Board. It is recommended to be used with third party devices
like alarm control panels.
This manual must be seen as a guide and not as a step by step instruction manual since
networking will be different from site to site.
It is assumed that the installer has knowledge of networking and knows the Nemtek products
used in the network.
Nemtek branches can provide training and product knowledge.
DISCLAIMER
NEMTEK Holdings (Pty) Ltd or any of its subsidiary companies does not guarantee that the
operation of the product will be uninterrupted or totally error free.
Energizer specifications may be altered without prior notification.
The installer must take into consideration the applicable municipal laws concerning the
installation of electric fences. General guidelines are available, or refer to the website:
http://www.nemtek.com. International standards can be viewed at http://www.iec.ch and
South African standards on http://www.sabs.co.za.
3

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Druid 28LCD and is the answer not in the manual?

Table of Contents

Save PDF