Lightmaxx Vega Haze 900 User Manual page 15

Hint! (Power supply)
It is essential that you check that the device voltage matches your local mains
voltage. It is highly recommended that you fuse your mains socket with a residu-
al current circuit breaker (FI).
If you do not use your device for a longer period of time or carry out maintenan-
ce work, disconnect the device from the mains in order to minimize danger. The
same applies to storm conditions such as thunderstorms, fl oods, etc.
Hint! (Condensation)
To avoid condensation in the unit, the unit should adapt to the ambient tempe-
rature before commissioning.
Hint! (Unwanted odours)
A new product can sometimes lead to unwanted odours. This reaction is normal
and disappears after a few minutes.
Installation:
Always check the device for damage before use. Use the original packaging or suitable transport or
storage packaging to protect the product optimally from infl uences such as dust or moisture, etc.
when not in use.
The device can be installed either standing or hanging. The mounting must always be done on a
solid, approved support or an appropriate surface. Use the opening of the brackets to attach the
device. Always create a second, separate safeguard for the device, e.g. by means of a safety wire.
All work on the device (e.g. installation) should always be carried out from a stable and approved
platform. Make sure that the area below you is closed off.
15