Cisco WAP125 Manual page 8
Reboot and reset to factory default settings
Hide thumbs
Also See for WAP125:
- Quick start manual (13 pages) ,
- Administrator's manual (114 pages) ,
- Quick start manual (14 pages)
Advertisement
Step 1. Press the Reset button for more than 10 seconds until the lights go off.
Step 2. Release the Reset button when the lights turn back on.
Note: In both above images, the WAP125 is pictured.
Reset through the Web-based Utility
Step 1. Log in to the web-based utility of your WAP and choose Administration > Reboot.
Advertisement
