Advertisement
CAUTION! – ALWAYS UNPLUG YOUR TREE FROM ITS
POWER SOURCE BEFORE ATTEMPTING EITHER FUSE
OR BULB REPLACEMENT.
USE AND CARE INSTRUCTIONS
FUSE REPLACEMENT
This product comes with an overload protection (fuse). A blown fuse indicates an overload or short
circuit.
If a fuse blows, unplug tree from wall outlet.
instructions below (follow product marking for proper fuse rating). If the replacement fuse blows, a
short circuit may be present and the product should be reviewed to determine the cause.
A) Fuse replacement of power cord with foot pedal switch (E) (replaceable 3-amp 125V fuses are
located in plastic bag)
1. Grasp plug and remove from its power source (Illustration.1).
2. Locate blown fuse(s) by sliding access cover on top of plug towards prongs.
3. Remove blown fuse by turning the plug over. A fuse should fall into your hand
(Gentle tapping may be required).
4. Replace blown fuse with spare replacement fuse. Close fuse cover by sliding
fuse access cover towards the cord.
B) Fuse replacement of power cord (F) (replaceable 3-amp 125V fuses are located in spare parts bag)
1. Grasp plug and remove from its power source.
2. Locate blown fuse(s) by sliding access cover on top of plug towards
prongs.
3. Remove blown fuse by turning the plug over. Fuse should fall into your
hand (Gentle tapping may be required).
4. Locate spare replacement fuses in spare parts bag.
5. Replace blown fuse with spare replacement fuse(s). Close fuse cover by sliding fuse access cover
towards the cord.
BULB REPLACEMENT:
1. Grasp plug and remove from its power source
2. Pull bulbs and plastic base straight out of socket. Do not twist bulbs.
3. Replace burned bulb with 3.0/2.0 volt 0.06/0.04 watt LED bulb ONLY.
(Additional bulbs are included for your convenience).
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
a) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When
products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting
(GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
b) This seasonal use product is not intended for permanent installation or use.
c) Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of
heat.
d) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
e) Do not let lamps rest on the supply cord or on any wire.
f) Unplug the product when leaving the house, when retiring for the night, or if left unattended.
g) This is an electric product – not a toy! To avoid risk of fire, burns, personal injury and electric shock
it should not be played with or placed where small children can reach it.
h) Do not use this product for other than its intended use.
i) Do not hang ornaments or other objects from cord, wire, or light string.
Replace the fuse as per the fuse replacement
Illustration.1
(Exhibit A)
3
j) Do not cover the product with cloth, paper or any material not part of the product when in use.
k) This product is equipped with push-in type lamps. Do not twist lamps.
l) This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an
extension cord unless plug can be fully inserted. Do not alter or replace the plug.
m) This product employs overload protection (fuse). A blown fuse indicates an overload or short circuit
situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or
products that may be attached to the product. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse rating) and check the product. If the
replacement fuse blows, a short-circuit may be present and the product should be discarded.
n) Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS
BASIC PRECAUTIONS SHOULD BE FOLLOWED WHEN
USING THIS PRODUCT:
1. This is an electrical product – not a toy! To avoid risk of fire, burns, personal injury and electrical
shock it should not be played with.
2. Do not hang ornaments or other objects from cord, wire, or light string. Hang ornaments only on
the tree itself.
3. For your safety, unplug the product when leaving the house, retiring for the night, or if left
unattended.
4. Do not let bulbs rest on the supply cord or on any wire.
5. Do not close doors or windows on the product or extension cords as this may damage the wire
insulation.
6. Should you discover any of the following: a) cut, damaged, or frayed wire insulation; b) cracks in
the sockets; c) loose connections or exposed wires, please call us.
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
STORAGE: When storing the product, carefully remove the product from wherever it is placed,
including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors,
connections, and wires. Disassembled tree can be stored in its original box. Store tree in a cool dry
place where the temperature does not exceed 100 degrees Fahrenheit.
UL MODEL # TMP7-6(0.4)
(Inspect product carefully before using or re-using):
4
Advertisement
