Download Print this page

Advertisement

Quick Links

ULTR A SERIES
G7-S72

Advertisement

loading
Need help?

Need help?

Do you have a question about the Matrix and is the answer not in the manual?

Questions and answers

Summary of Contents for JOHNSON HEALTH TECH. Matrix

  • Page 1 ULTR A SERIES G7-S72...
  • Page 3: Warranty

    * Ensure a minimum clearance width of 0.6 meters (24”) for access to and Inspect Frame Bi-Annually passage around MATRIX strength equipment. Please note, 0.91 meters (36”) is the ADA recommended clearance width for individuals in wheelchairs. Clean Machine As Needed...
  • Page 4: Installation

    It is recommended that all users of MATRIX exercise equipment be informed of the following information prior to its use. DEATH OR SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT.
  • Page 5: Seated Leg Curl

    SEATED LEG CURL SEATED LEG CURL Adjust pad to thighs Position leg pad below ankles Adjust back pad to align knees with orange pivot...
  • Page 6 4MM L-Shaped Allen Wrench Phillips Screwdriver 5MM L-Shaped Allen Wrench 8MM Open-End Wrench 6MM L-Shaped Allen Wrench 17MM Open-End Wrench 8MM L-Shaped Allen Wrench Guide Rod Lubrication If any items are missing please contact your country’s local MATRIX dealer for assistance.
  • Page 7 Be sure to remove the insulating sheet Step 1 Hardware Step 2 Hardware when installing the rep counter. Description Description Bolt (M10x80L) Bolt (M10x80L) Washer (Φ10.2) Washer (Φ10.2) Nyloc Nut (M10) Nyloc Nut (M10) Spring Washer (M10) Bolt (M10x25L) Plug Spring Washer (M10) Bolt (M10x20L) Arc Washer (M10)
  • Page 8 Step 3 Hardware Step 4 Hardware Description Description Bolt (M8x25L) Nyloc Nut (M10) Spring Washer (M8) Bolt (M8x25L) Washer (M8) Spring Washer (M8) Spacer Washer (M8) Bolt (M12x60-30) Special Bolt (M10x34.2) Bolt (M10x25L) Washer (M10) Set Screw (M6x4) Pre-installed hardware...
  • Page 9 Step 5 Hardware Step 6 Hardware Description Description Bolt (M10x25L) Bolt (M8x10L) Washer (M10) Washer (M10) Nyloc Nut (M8) Pre-installed...
  • Page 10 Step 3 Hardware ASSEMBLY COMPLETE! Description Bolt (M10x25L) Spring Washer (M10) Washer (Φ10.2) Bolt (M10x75L) Machine Sensor Locations* G7-S13 Chest Press G7-S23 Shoulder Press G7-S71 Leg Extension G7-S72 Seated Leg Curl G7-S70 Leg Press G7-S33 Lat Pull-down G7-S42 Triceps Press G7-S34 Seated Row G7-S40...
  • Page 12 G7-S72 Part # 1000411323 © 2018 Johnson Health Tech Rev 1.1 A...

This manual is also suitable for:

Ultra seriesG7-s72