Panasonic SV-AV10A Operating Instructions Manual page 25

_~ëáÅ=cìåÅíáçåë
_ÉÑçêÉ=oÉÅçêÇáåÖ=çéÉê~íáçå
Do not cover the sensor with your hand when using the
Remote Control and recording pictures.
1Remote Control Sensor
2White Balance Sensor
ª MPEG2/MPEG4 Motion Image
MPEG stands for Moving Picture Experts Group. It is
the name of the standard for the compression and
extension of a digital motion image and sound enacted
by ITU-TS (International Telecommunications Union-
Telecommunication Standardization Sector) and ISO
(International Standardization Organization).
The picture data is transferred at a rate of about
30 frames per 1 second under MPEG2 format.
Therefore, you can enjoy a beautiful and smooth
motion image.
The picture data of MPEG4 is inferior to those of
MPEG 2 in smoothness because the number of the
frames transferred in MPEG4 is less than that in
MPEG2. However, it is suitable for use in PC because
the transfer rate is higher.
ª OSD Indication on LCD Monitor
This SD Video Camera can appear or disappear
indications on the LCD Monitor. (
N
Press the [REC/PLAY] Button to select
Recording Mode and set the operation
mode.
O
Press the [MENU] Button and select [OSD
Output] on [Display Setup] to [On] and
press the [1 SET] Button.
≥OSD Indications appears on LCD Monitor.
≥If you select [Off] the OSD Indication which is limited
appears on LCD Monitor.
70)
1
2
N
O
g
SET/ Menu
OR