Advertisement
Length of DMR is to the outside of the unit. Prepare mounting for DMR to either sit on or be suspended
1.
under noting finished height of the unit should be finished paving/deck level
In some cases the DMR is delivered flat packed, if you need to build up
2.
a. Screw both ends to lid section with roller mounting internal (ends are interchangeable)
b. Put mounting brackets on roller with drive ring to drive cog end, insert to end plat mounts.
c.
Secure with 2 x m8 bolts each
Install square to pool by securing DMR to mounting with lid opening towards pool
3.
Install Pool Cover to DMR
4.
Pool Cover installation for Deck Mount Roller
Install the pool cover to maximum water line size then test the operation of the DMR. The pavers, deck or coping
over the edge of the pool the pool can catch the sides of the pool cover acting like a brake. This is of no concern for
normal above ground rollers as the roller is picking up, or pulling the cover up and out of the pool. With the DMR's
the cover is being pulled along the ground, meaning the edges are being pulled into the corners not out of them.
Simply trimming the pool cover narrower, to the coping opening size will fix the problem
Note: Square pools and pools with non-round paving generally will be 'grab' the cover more
We rarely get a warranty claim but just in case anything goes wrong we're here to help you. All Daisy products come
with a pro-rata warranty which covers the purchaser for defective materials or workmanship on a pro-rata basis. The
manufacturer will repair or replace the product upon inspection or photo image. Daisy reserves the right to refuse
repeat claims of the same damage. This warranty may be void if the purchaser fails to comply with the manufactures
install instructions.
Retain your proof of purchase for warranty coverage or register your warranty online
Failure to follow the installation steps correctly or excessive compacting around the box when installed may result in
crushing of the box front and/or back walls that will make the lid hard or unable to open. Repairing or fixing the lid
being due to it being unable to open due to this installation techniques is not covered under the warranty
5 Year Structural Warranty does not cover scratches or chips to the powder coating colour or finished surfaces
Daisy Pool Covers
Phone: 1300 55 18 11
hello@daisypoolcovers.com.au
daisypoolcovers.com.au
Advertisement
