Panasonic SC-AK600 Operating Instructions Manual page 21

SLEEP SLEEP
AUTO OFF TO OFF
1 2
4 5
CH SELECT
7 8
TEST EST CH SELECT CH SELECT
DISPL AY AY DIS DI DIMME MER
TEST
DIGITAL-IN DIGITAL-IN
TUNER UNER
AUX AUX
DELAY DE AY
PL REW
DELAY
SUBWOOFER SUBWOOFER
S.SOUND EQ S.SOUND EQ
SHIFT
VOLUME VOLUME
+
+
1
CH SELECT
+
2
+
1.
+
2.
+
CL CLOCK CK PLAY
TIMER TIMER REC REC
3 DISC
10
6
9 0
CH H LE VE VEL
PL AY AY MODE PROGR AM
– CH LEVEL +
TAPE PE CD
FF
PRESET T EQ MU MUTING
– VOLUME +
TEST
DISPL AY
CH LE VEL
PL AY MODE PROGR AM
DIMMER
CH LE VEL
PL AY MODE PROGR AM
DELAY
PL
CH LE VEL
PL AY MODE PROGR AM
Enjoying surround sound
Preparation
DOLBY DIGITAL: Press [DIGITAL INPUT 1/2] to select the
input source.
DOLBY PRO LOGIC: Press [p PL] to select "NORMAL" or
"PHANTOM".
Speaker level adjustments
Remote control only
If the level of the speakers appears to be different while listening to
a source, adjust the level of the speakers to the same apparent
level.
1 Press [SHIFT] + [TEST] to output a test signal.
L: Front left
C: Center
R: Front right
RS: Right surround
LS: Left surround
SW: Subwoofer
When DOLBY PRO LOGIC is on
•
The surround channel for Dolby Pro Logic is monaural so the
indicator appears as "S" instead.
•
In the PHANTOM mode, the center speaker is OFF, so there
is no center test signal and "C" is not displayed.
2 Press [SHIFT] + [CH LEVEL (+, –)].
To stop the test signal, press [SHIFT] + [TEST] again.
To select a specific speaker
1 Press [SHIFT] + [CH SELECT] to select the speaker.
For Dolby Digital:
Every time you press the buttons:
L C R RS LS
For Dolby Pro Logic:
Every time you press the buttons:
L C for NORMAL mode only)
The current channel level is displayed.
2 Press [SHIFT] + [CH LEVEL (+, –)].
Repeat steps 1 and 2 to adjust the level accordingly.
Delay time adjustments
Remote control only
By adjusting the delay time, the difference in the distance from the
viewing and listening position to the front speakers and the distance
to the center speaker and surround speakers can be offset and
made equal. This achieves better sound localization and makes a
more life-like reproduction of the sound field possible.
1. Press [SHIFT] + [DELAY] to select the channel to be
adjusted.
The current delay time is displayed.
Press again to change the speaker channel;
C (Center speaker) S (Surround speakers)
2. Press [SHIFT] + [CH LEVEL (+, –)] to set the delay time.
The delay time changes with each press.
The increments depend on the channel being adjusted.
Surround mode Speaker
Center
Dolby Digital
Surround
Dolby Pro Logic Surround
A see page 19 for information about delay time.
SW
R S
Available delay time setting (ms)
0, 1, 2, 3, 4, 5
0, 5, 10, 15
15, 20, 25, 30
21
RQT6243