Panasonic SC-HT400K Operating Instructions Manual page 5

5
Connecting the speakers to the receiver
Speaker cords
¡Connect the cords so the numbers on the stickers match the numbers under the terminals.
¡Connect the red cords to the red terminals (+) and the black cords to the black terminals (–).
¡Ensure the wire of the cords are fully inserted so they do not touch each other and short circuit.
¡After you have completed set-up and connection, wind the excess cord and keep together with string.
1 2 3
Attaching to a wall
To attach vertically
Rubber feet
(included)
Screw
(not included)
106 mm
(4-11/64")
Rubber feet
(included)
To attach horizontally
Screw
(not included)
106 mm
(4-11/64")
30–35 mm
(1-3/16" to 1-3/8")
7–9 mm
(9/32" to 23/64")
Note
Attach four rubber feet to each speaker, ensuring they do not cover
the holes. Screw the wood screw into a thick and hard part of the
wall.
The surface you attach the speakers to must be able to support
over 10 kg (22 lb). Consult your dealer for details.
SURROUND L
SURROUND R
SUBWOOFER
30–35 mm
(1-3/16" to 1-3/8")
7–9 mm
(9/32" to 23/64")
Screw
(not included)
Rubber feet
(included)
SPEAKERS
HAUT-PARLEURS
SUB- SURROUND CENTER FRONT
WOOFER
R L R L
6 5 4 3 2 1
Attaching to speaker stands
Attach the stands
Plate thickness + 7 to 10 mm
with these holes.
(9/32"–25/64")
Speaker stands (not included)
Ensure the following conditions are met when you purchase
your speaker stands.
¡Screw; diameter: 5 mm, pitch: 0.8 mm, length: thickness of stand
plate plus between 7 and 10 mm.
¡Distance between the centers of the holes; 60 mm
¡The stands must be able to support over 10 kg (22 lb).
¡The stands must be stable even if the speakers are in a high
position.
Caution
¡Use
the
recommended system. Failure to do so may
lead to damage the amplifier and/or the
speakers, and may result in the risk of fire.
Consult a qualified service person if damage
has occured or if you experience a sudden
change in performance.
¡Do not attempt to attach these speakers to
walls using methods other than those
described in this manual.
Speaker notes
¡You can damage your speakers and shorten their useful life if you
play sound at high levels over extended periods.
¡Reduce the volume in the following cases to avoid damage.
– When playing distorted sound.
– When the speakers are receiving howling from a microphone
or record player, noise from FM broadcasts, or continuous
signals from an oscillator, test disc, or electronic instrument.
– When adjusting the sound quality.
– When turning the unit on or off.
CENTER
6-8 /EACH SPEAKER
6-8 /CHAQUE
FRONT R
FRONT L
5 mm, Pitch 0.8 mm
60 mm
(2-23/64")
speakers only with the
5
RQT6361