Panasonic DVD-S25UP-S Operating Instructions Manual page 11

To change unit setting
1
DISPLAY
Press three times.
Play menu–Change play sequence
[DVD-V] [VCD] [CD] [WMA] [MP3]
To repeat a specified section (A-B repeat)
Press [ENTER] at the starting and ending
A B
points. Press [ENTER] again to cancel.
[DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
To repeat an item (
OFF
Displays the play mode setting
---: Normal play
RND: Random play
To mark a position to play again (Marker)
Press [ENTER] to highlight the first asterisk
and press [ENTER] again to mark a position.
You can mark up to 5 positions.
1 2 3
To mark another position: [2 1]
To recall a marker:
To erase a marker:
Display menu–Change screen appearance
To fit 4:3 image to a 16:9 aspect television
(4:3 Aspect)
Normal: Stretches images laterally
Auto: Expands letterbox images to fill the
screen and put the other images in the
Normal
center
Shrink: Puts images in the center
Zoom: Expands images to fill the screen
To expand the picture to fill the screen
( page 6, Zoom)
x1.00
To change the subtitle position and
brightness (
0 0
To adjust the brightness of the on-screen
displays (j3 to i3)
0
2
ENTER
Select the menu.
page 8, Repeat play)
PGM: Program play
[ENTER]
[2 1]
[ENTER]
[2 1]
[CANCEL]
page 6, Subtitle)
3 4
ENTER
Select the icon.
Picture menu–Change picture quality
To select the preset picture quality (
Picture Mode)
N
To switch between Progressive (480P) and
Interlace (480I) video
480P
To select according to the type of material
(film or video) for progressive output
Auto 1: For viewing film material
Auto1 Auto 2: For viewing film material including 30-
frame-per-second progressive video
Video: For viewing video material
Audio menu–Change sound effect
To enjoy virtual surround with television's
speakers (
SP 1
[DVD-V] (Dolby Digital, DTS, MPEG, 3-channel or
over, with the dialogue recorded in the center
channel)
OFF
To make the dialogue in movies easier to hear
(Dialogue Enhancer)
To change the position of the icons
To enjoy progressive video
1. Connect to the component video input terminals on a 480P
compatible television.
2. In SETUP menu, set "Progressive Out (Component)" to
"Enable" ( page 12).
3. Select "480P" ( above, Picture menu).
≥Video will not be displayed correctly if connected to an
incompatible television.
≥All Panasonic televisions that have 480P input connectors
are compatible. Consult the manufacturer if you have
another brand of television.
5
ENTER
RETURN
Operate. Press to exit.
page 6,
page 6, Advanced Surround)
11