Parts Package; Notes On Safety; Installation And Mounting; Mounting Control - Fixpoint 77450 Manual

3 Parts Package:

4 Notes on Safety:

ATTENTION! Demounting of the lamps' housing is only permitted to skilled
electricians! There is a danger of electric-shock!
• Your Fixpoint Lenslight is no toy and children must not use it anyway, because it contains
®
fragile, small and swallowable parts such as cables, which can strangle and shock people
by electricity with incorrect use!
• Remove and dispose packaging materials, because playing children could cut on it.
Furthermore there is a danger of swallowing and inhaling of incidentals and insulating of
materials.
• Do not interrupt the lamp to extreme heat, coldness or direct sun insulation. There is a
risk of fire caused to the burning glass effect of the magnifier! Therefore close the
magnifier cover after use.
• Furthermore avoid vibrations, mechanical, magnetic and electro-magnetic influences, as
well as liquid or dust effects.
• If defects, mechanical damages, disturbances or other problems occur, which are not
solvable with this manual, take the device out of work immediately and consult your
dealer for questions, repairing or change like it is described in chapter 6.
• Do not modify or alter the device or its sccessories in any way.
• Do not use any damaged parts.
• Never open the housing, because the lamp works with a voltage of 230 Volts!
5 Implementing and Operation:
ATTENTION! The mounting on vertical walls and areas is not admitted!

5.1 Installation and Mounting:

Models equipped with stand must be positioned on a solid and horizontal base. Models
with table clamp only have to be affixed on adequate solid tables or work plates with a
thickness of 20 to 60 mm. Prepregs, fibre boards and hollow profile boards are not
useful, because they can ease or brake easily during use.

5.2 Mounting Control:

Please mind that moving of your Fixpoint
surface during use. Caused to numerous pivoting of the models with table clamp a
loosening of the fixation can happen. That`s why mind close fixing of the system.

5.3 Connecting the Power Supply:

Connect the device to a 230 Volts mains socket. Your lamp does NOT work with high-
voltage current or a voltage of 12 Volts.

5.4 Adjusting the Lamp:

By moving the head of the lamp and the hinged bracket, if existing,
the lamp can be adjusted.
1 pc Fixpoint Lenslight
®
1 pc Allen key (only for models with stand)
1 pc Table Clamp (only for models with table clamp)
1 pc User Manual
-Lenslight could cause scratches to the table
®
Fig. 1
1
9