Tisch- oder Arbeitsplatten mit einer Stärke von 20-60 mm. Nicht geeignet sind Faser-, Kunststoff- und Hohlprofilplatten, weil diese mit der Zeit nachgeben können. 5.2 Befestigungskontrolle: Beachten Sie, dass an der Montagestelle durch Bewegen Ihrer Fixpoint -LED Lupenleuchte ® während des Gebrauchs Beschädigungen der Tischplattenoberfläche entstehen können.
5.7 Lupenbenutzung: Um die Lupe zu benutzen, klappen Sie die Lupenabdeckung auf. Diese rastet beim Auf- klappen automatisch ein. Schließen Sie die Abdeckung wieder nach Benutzung um die in Kapitel 4 beschriebenen Gefahren zu vermeiden und Ihre Fixpoint LED-Lupenleuchte vor ®...
Sie ihn von der Lampe wie abgebildet. Bild 5+6 3. Nun kann die Lupe gegen eine neue gleicher Größe mit gleicher oder unterschiedlicher Vergrößerung ausgetauscht werden. 7.2 Modelle 77450 und 77541: Bei diesen Modellen ist kein Lupenwechsel möglich. 8 Pflege, Wartung, Lagerung und Transport: •...
Einwirkung Sie das Gerät nicht an und konsultieren Sie Ihren Händler. Beachten Sie dazu Kapitel 4 und 10. 10 Technische Daten: Modelle 77450 77451 Betriebsspannung 220-240 V AC bei 50 Hz 220-240 V AC bei 50 Hz Leistungsaufnahme...
12 CE-Konformitätserklärung: Dieses Gerät entspricht den EU-Richtlinien 2006/95/EG und 2004/108/EG und der EN 62079 für die Dokumentation: Mit dem CE Zeichen erklärt Fixpoint , eine registrierte Marke der Wentronic GmbH, dass das Gerät die ® grundlegenden Anforderungen und Richtlinien der europäischen Bestimmungen erfüllt.
Page 8
5.6 Engaging 5.7 Using the Magnifier 6 Warranty and Liability 7 Changing the Lens 7.1 Models 77455 and 77456 7.2 Models 77450 and 77451 8 Care, Maintenance, Storage and Transport 9 Troubleshooting 10 Specifications 11 Notes on Waste Disposal 12 CE Declaration...
20 to 60 mm. Prepregs, fibre boards and hollow profile boards are not useful, because they can ease or brake easily during use. 5.2 Mounting Control: Please mind that moving of your Fixpoint -Lenslight could cause scratches to the table ®...
Open the magnifier cover to use the magnifier. The cover will catch automatically. Close the cover after use to avoid the dangers like described in chapter 4 and to avoid damages and pollution of your Fixpoint -Lenslight. Besides the light distribution is more ®...
7 for a bulb change. • Please store your Fixpoint®-Lenslight in a dry and dustproof surround when not used for longer time. The lamp must be stored impenetrable for children. Please disconnect the device from mains when not in use.
12 CE Declaration: This device corresponds to EU directives 2006/95/EC, 2004/108/EC and EN 62079 for documentations: With the CE sign Fixpoint , a registered brand of the ® Wentronic GmbH ensures, that the product is conformed to the basic standards and directives.
Page 16
Revision Date: 2010-12-08 Version 3 Fixpoint is a registered ® trademark of Wentronic GmbH in Germany and/or other countries. Wentronic GmbH Pillmannstraße 12 38112 Braunschweig, Germany Designed and Developed in Germany. Assembled in China...
Need help?
Do you have a question about the 77450 and is the answer not in the manual?
Questions and answers