1,MFL67798026,영영 19. 3. 14. 영영 4:49 Page 68
INSTALLATION GUIDE AT THE SEASIDE
68
INSTALLATION GUIDE AT THE SEASIDE
Sea wind
Windbreak
Sea wind
3) Ensure the distance between the outdoor unit and the sea shore is more than 300 m and less than 1 km.
Part that contacts
corrosive air
Part that passes
through the
corrosive air
It is recommended that the outdoor unit is located over 300 m from the sea.
Pasts of Corrosion Resistance
Ocean Black Fin' Heat Exchanger
Barrier
Front/Side/Top/Rear Panel & Rear Grille
Base Pan
Screws
Sea wind
Pasts of Corrosion Resistance
Epoxy resin + Hydrophilic film (Ocean Black Fin)
Epoxy + polyester : 120μ ± 20μ
Epoxy + polyester : 120μ ± 20μ
Epoxy + polyester : 120μ ± 20μ
Stainless steel