Table of Contents
Advertisement
Quick Links
MPC-R5200 User manual
Maxell Rechargeable Power Bank
MPC-R5200
Accessories:
Charger unit x 1
Charging cable (~20cm) x 1
Instruction booklet with warranty sheet x 1
-This instruction manual is not allowed to be copied partially or wholly.
Unauthorized reproduction is also prohibited.
-Should there be product improvements, the product appearance or
Specifications may change without prior notice.
Disclaimers:
-Maxell is not liable for the injuries due to fire accidents, earthquake, third party'
activities.
- Maxell is not liable for other defects due to improper misuse of the product
caused by the user.
- Maxell is not liable for any injury caused when using this product or during the
connection between device to device.
- This product is designed only for Normal Consumer Use and should NOT be
used for Industrial Purposes. If the product is used in this way, Maxell is NOT
liable for human injury or fire accident.
Caution!
Please follow the caution below when using our product.
Danger:
Do not connect input and output conversely.
Do not take power from sources other than from the USB port.
Do not disassemble or modify the product
Do not immerse in water
Do not make short circuit to the ports
Do not leave the product in places of high temperature or under direct sunlight.
Do not throw into fire
Do not touch the product if you see any liquid leaking around
Advertisement
Table of Contents
Related Manuals for Maxell MPC-R5200
Summary of Contents for Maxell MPC-R5200
- Page 1 - Maxell is not liable for other defects due to improper misuse of the product caused by the user. - Maxell is not liable for any injury caused when using this product or during the connection between device to device.
- Page 2 Warning! Do not operate the product if it generates excessive heat or have abnormal smell or change in color. If any liquid from the product comes into contact with the skin or clothes, please rinse with clean water immediately. When the specified charge time is over, and charging is still in operation, please stop the charging immediately.
- Page 3 ※Press the power button, the LED will display the battery remaining level within 5 second when there is no connection. [Charging Cable] ※The Charging Cable is for charging purposes only and not for data communication. Operation Procedures: Charging for this product (Your product will come pre-charged, however to optimise the battery, please charge the battery before use after purchase) -To use the provided USB cable, input terminal connect to the USB AC adaptor...
- Page 4 -Charging time (the USB AC Adaptor DC5V / 1A) 0 to 80%：around 6hrs 0 to 100%：around 10hrs Attention! Please confirm the port direction before connection. Incorrect connection may damage the product. Please end charging if your device cannot be fully charged after a certain period of time.
- Page 5 When the device is at zero battery level or depending on if the device is in use whilst charging, boosting time be longer or the device may not as quickly as it should. Please check before charging. Maxell warranty does not cover any accidental loss of your data.
- Page 6 Charging LED light PC is in standby mode. Change PC from standby does not come ON mode. when this product is USB port does not have Disconnect other device charging. Or, it takes sufficient power from the output port. longer than the This product is charging Disconnect the device.
- Page 7 Specification: Product size: ~47x91x23mm (without protruded parts) Input voltage/ current: DC5V/ max. 1A Output voltage/ current: DC5V/ max. 2A (OUT1 + OUT2) Unit weight: ~140g Operation temperature: 0~40℃ Charging time: ~ 6 hours (0% to 80%) ~ 10 hours (0% to 100%) (The above estimation assume to use USB AC Adaptor DC5V / 1A) The length of the Charging cable: ~20cm...
Need help?
Do you have a question about the MPC-R5200 and is the answer not in the manual?
Questions and answers