Domair CoolCub DRAF-122MIN User Manual page 24

Air filter replacement
IMPORTANT: the air filter must be replaced every 6 months, or as soon as the
• Always make sure that the power supply to the device is disconnected before
replacing the filter.
• Slightly lift the locking button located at the bottom of the front grille and pull it
towards you to remove the grille from the device (Fig.7).
• Take hold of the filter and gently slide it out of the device (Fig.8).
• Install a new filter, taking care that the paper strips are arranged vertically (Fig.9).
• Insert the pin on the top of the grill into the corresponding housing of the device,
then lightly press on the locking button to lock it in place and keep the grille in
place (Fig.10).
Maintenance
REMINDER: UNPLUG THE APPLIANCE BEFORE FILLING, SERVICING OR
• The device must be cleaned and checked regularly, the tank at least once a
week.
• Take care that water or any other liquid does not come in contact with the motor
during cleaning.
• Use a soft, damp cloth to clean the outside of your appliance, and then dry it.
• To clean the inside of the appliance body (the tank part), use a slightly damp
cloth.
• Do not use THINNERS, ALCOHOL or OTHER CHEMICALS to clean your device.
• The air inlet and outlet grilles must be cleaned regularly using a vacuum cleaner
or a soft brush.
• In case of prolonged non-use, empty the device completely (If this
instruction is not followed, the warranty will not apply)
- Empty the tank, clean and dry it.
- Operate the device in high fan mode for about 4 hours to ensure all the internal
parts are completely dry.
- Unplug the device and carefully store the adapter and the power cable.
Rev 1_ 16 01 20 Fabriqué en Chine Page 24
performance of the device decreases.
OTHERWISE HANDLING IT