Dividing Files; Erasing Files; Moving Files; Erasure Prevention - Panasonic RR-QR400 Operating Instructions Manual

Dividing files
You can divide a file into two at a point you choose. This allows you to extract the im-
portant parts of a recording to save.
Preparation:
Select the folder and the file you want to divide. (page
6, steps1-2)
The file numbers after the divided file increase by one.
Play is ready to start from the beginning of the latter of the two files created by this
operation.
Note .
≥You cannot divide a file if a folder already has 99 files.
≥You may not be able to divide recordings less than one second.
≥There may be a slight difference between the recording start time display for the
files after division and the actual recording start time. The recording start time is in-
tended to serve as a general guide only.
≥The total time may not agree with the original recording time if a file is divided into
many different files.
Moving files
You can move a file to a different folder. This allows you to categorize files and save
them together.
Preparation:
Select the folder and the file you want to move. (page
6, steps1-2)
1
Press [PLAY/STOP, SEL]
to start playback of the file.
2
Press [DIVIDE] at the point
you want to divide the file.
The number of the file flashes.
B
File number
Total number of files
3
Within 10 seconds, press
and hold [DIVIDE].
The file is divided.
B
File number after division
1
Press [PLAY/STOP, SEL]
to start playback of the file.
2
Press [FOLDER] to select
the folder you want to
move the file to.
Present folder
A
C
New folder
3
Within 10 seconds, press
[PLAY/STOP, SEL].
The file moves to the end of the selected
folder.
7
Erasing files
Files can either be erased one by one or all at once.
ERASE mode cannot be selected while an empty folder is selected.
Erased files cannot be recalled.
Preparation:
Select the folder first to erase individual files or folders.
(page 6, step1)
HQ
Note .
≥Locked files will not be erased (see below).
≥Total recording time can be reduced after erasing a number of files. Remedy this by
erasing all the folders occasionally.
≥You cannot erase files being played slow or fast.

Erasure prevention

Lock individual recordings to avoid accidentally erasing them.
Preparation:
Select the folder containing the file you want to lock.
(page 6, step1)
To unlock:
1 Select the locked file.
2 Repeat steps 1 and 3 for each file.
1
Press and hold
[ERASE] while
stopped or during
play.
2
Within 10 seconds, turn
[PLAY/STOP, SEL] to select the
file you want to erase.
The display changes in the following order:
ERASE
B
The first file in the folder The last file in the folder
ERASE
A B
C D
All folders All files in the folder
3
Within 10 seconds, press [ERASE].
The selected file is erased.
1
Press [MODE]
until "LOCK"
flashes.
2
Within 10 seconds, turn
[PLAY/STOP, SEL] to select
the file.
3
Within 10 seconds, press
[PLAY/STOP, SEL].
The file is locked and "LOCK" is displayed
until canceled.
8
ERASE
B
ERASE
B
ERASE
B
LOCK
B