Description Of Menu-Utility Functions - Panasonic BT-LH1770P Operating Instructions Manual

4-9．Description of MENU-UTILITY Functions
INPUT <UTILITY>
VIDEO CONT VR ASSIGN
AUDIO CONTRAST RANGE
TALLY
TC/WFM/VSC
MARKER OSD TRANSPARENT
CAPTURE FORMAT DISPLAY
UTILITY SYSTEM LOCK
FUNC.SW BATTERY TYPE
P.REMOTE RETURN
UMD/IMD
USB MEMORY
C.CAPTION
NETWORK
RESET
INFO
EXIT
① Setting the CONT VR ASSIGN
・ The "CONT" volume at the front can be operated
for the purpose of backlight adjustment.
・CONT : Operates for the purpose of CONTRAST
adjustment
・BL : Operates for the purpose of backlight ad-
justment
This setting is reflected on the PRESET
value.
・Default setting is CONT.
② Setting the CONTRAST RANGE
・NORMAL ：Set the video level within the range
with no over-flow even if the con-
trast level is MAX.
：The contrast level can be increased
・WIDE
to two times.
*The high level video has the
over-flow.
・Default setting is NORMAL.
③ Setting the TALLY
・Set any of the following display modes of the tally
lamps located at the top of the front of the moni-
tor.
・R/G：R is on the left side and G on the right side,
when facing the screen.
Ｒ G
[R-TALLY ON] [G-TALLY ON]
・G/R：G is on the left side and R on the right side,
when facing the screen.
G R
[G-TALLY ON] [R-TALLY ON]
①
CONT
②
NORMAL
③
R/G
④
LOW
⑤
3SEC
⑥
EXECUTE
⑦
AC/Ext.
・R+G：The entire tally is displayed.
The lamp is displayed in amber when both the
R-TALLY and G-TALLY are set at ON. Both R-
and G-TALLY at ON.
・
it is solely set to ON.
If both R-TALLY and G-TALLY are set to ON,
they will be displayed on the left and right sides.
・G/R ALL：Displays the entire TALLY only when
it is solely set to ON.
If both R-TALLY and G-TALLY are set to ON,
they will be displayed on the left and right sides.
・Default setting is R/G.
④ Setting the OSD TRANSPARENCY
・The background for displaying the OSD can be set
on 3 levels: LOW (semi-transparent) to HIGH
(transparent).
・Default setting is LOW.
- - 34
<LOCK ALL/PRESET>
COPNFIG UNLOCK
ENTER PASSWORD
POWER ON CONFIG OFF
SAVE CONFIG EXECUTE
RETURN
←[R-TALLY ON]
R
←[G-TALLY ON]
G
←[Both R and G-TALLY at ON]
AMBER
R/G ALL：Displays the entire TALLY only when
←[R-TALLY ON]
R
←[G-TALLY ON]
G
←[Both R and G-TALLY at ON]
Ｒ G
←[R-TALLY ON]
R
G ←[G-TALLY ON]
G R
←[Both R and G-TALLY at ON]
⑧
⑨