Fujitsu AG G09LVCB series Design & Technical Manual page 29

2) Embedding the indoor unit in a wall
When embedding the indoor unit in a wall, restrict the movement of the horizontal vane for the
upper air outlet so that it only operates horizontally.
Setting description

Standard
(Setting forbidden)
In a wall
3) Cooler room temperature correction
Depending on the installed environment, the room temperature sensor may require a
correction.
The settings may be selected as shown in the table below.
Setting description

Standard
Slightly lower control
Lower control
Warmer control
4) Heater room temperature correction
Depending on the installed environment, the room temperature sensor may require a
correction.
The settings may be changed as shown in the table below.
Setting description

Standard
Lower control
Slightly warmer control
Warmer control
(  ... Factory setting)
Function number Setting value
23
(  ... Factory setting)
Function number Setting value
30
(  ... Factory setting)
Function number Setting value
31
- (01 - 26) -
00
01
02
00
01
02
03
00
01
02
03