Sawyer 273-15 Manual

About Us

We appreciate your business!
Congratulations on your new SAWYER product. We are proud to
have you as our customer and will strive to provide you with the best
service and reliability in the industry. This product is backed by our
extensive warranty and world-wide service network. To locate your
nearest distributor or service agency, please contact us at the phone
number and address listed on the bottom of each page.
You are in good company!
Sawyer Manufacturing Company is the world leader in the design
and manufacture of pipeline and welding equipment and has been
since 1948. Sawyer equipment has become a standard in the industry
and continues to set the benchmark for quality and durability.
This user operation manual has been made to instruct you for the best
use and operation of your Sawyer product. Your satisfaction with our
products is our main goal. Please read this entire manual carefully,
noting all tips, notes and warnings. Safety always comes first.
Parts Diagram
B
E
Record the following information for warranty purposes:
Where purchased:________________________________________________
Purchase date:___________________________________________________
Equipment Serial #:_______________________________________________
A
D
This guarantee is limited to the repair or replacement of any parts found to be
defective, and no other liability–expressed, implied, or contingent–is assumed.
Sawyer Manufacturing Company
7799 S. Regency Dr., Tulsa, OK 74131 USA
P 918.834.2550 F
sawyermfg.com info@sawyermfg.com
V1.2
Guided Bend
Tester Manual
A. Hydraulic Relief Valve
B. ENERPAC Hydraulic Pump (526-4)
C. Hydraulic Hose Fitting (526-8M)
D. Plunger (C4FF-7)
E. Die (C4FF-8)
!
CAUTION:
Company offers a precise weld qualification
test for guided bend operations. The buildup
of high pressure inside the hydraulic guided
bend machine can cause injury to personnel
C
and damage to equipment. To avoid a rapid
discharge, ensure that all pressure hoses are
connected and secure. When the hydraulic
pressure does not increase enough to bend
the sample, check the hydraulic fluid levels
and add hydraulic fluid as necessary. Please
refer to ENERPAC manual for maintenance of
ENERPAC pump.

Warranty

All products manufactured by or for Sawyer Manufacturing Company are
guaranteed against defects due to faulty workmanship or materials for twelve
months from the date of purchase.
918.834.0318
Model 273-15
For 15 Ton Applications
CAUTION
Sawyer Manufacturing
!