Download Print this page
P1 DX825 Setup Manual

P1 DX825 Setup Manual

2.4ghz/5ghz
Hide thumbs Also See for DX825:

Advertisement

Quick Links

DX825 Wi-Fi
(2.4GHz/5GHz) Setup
1st September 2015
0

Advertisement

loading

Summary of Contents for P1 DX825

  • Page 1 DX825 Wi-Fi (2.4GHz/5GHz) Setup 1st September 2015...
  • Page 2 Key in USERNAME: admin and PASSWORD: admin123 as shown in the above (or below) diagram. Step 2 Once entered DX825 main dashboard page, click on the WiFi tab to enter the modem WiFi status section. The default WiFi is 2.4GHz...
  • Page 3 Click on the “Enable” button to activate the WiFi 5GHz. Click the WiFi 5GHz Click the Enable button Step 4 The DX825 modem will take about 10 seconds for processing. Then, proceed to click the “Apply” button. Click the Apply button...
  • Page 4 Step 5 Click “Status” tab on your left panel. You will see 2 Wi-Fi channels status appeared on the screen. This setting can be configured for guest and home users.
  • Page 5 To disable the WiFi, go to “Wireless Settings” section and choose either “WiFi 2.4GHz” or “WiFi 5GHz”. Click on the “Disable” button to de-activate the selected WiFi. Click the Disable button Step2 The DX825 modem will take about 10 seconds for processing. Then, proceed to click the “Apply” button. Click the Apply button...
  • Page 6 Step3 Click “Status” tab at your left panel. You will see the selected WiFi channel status “ON” appeared on the screen. Step4 The tab displayed only selected WiFi Channel. Only 1 WiFi channel...
  • Page 7 URL: http://10.1.1.254. Then key in USERNAME: admin and PASSWORD: admin123 as shown in the above (or below) diagram. Step2 Once entered DX825 main dashboard page, click on the WiFi tab to enter the modem WiFi status section.
  • Page 8 Step3 Next, click the WiFi Settings tab to enter the WiFi Settings/Configuration page. Step4 Under “Wireless Settings” section of WiFi 2.4GHz, type in your preferred SSID at the “Network Name (SSID)” field.
  • Page 9 Click “Apply” button to save the new settings for the new security configuration to be effective. Note: The default WiFi Authentication mode for DX825 modem is configured at “WPA2-Personal”. The steps to configure new security setting for 5GHz WiFi are the same as described above.
  • Page 10 Packet One Networks Malaysia Sdn Bhd All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form by any means, without the permission of Packet One Networks Malaysia Sdn Bhd. This document remains the property of Packet One Networks Malaysia Sdn Bhd.