Dip Switch Setting - LG MULTI V ARNU243TSA4 Installation Manual

Installation

DIP Switch Setting

1. Indoor Unit
Function
SW1 Communication N/A (Default)
SW2 Cycle N/A (Default)
SW3 Group Control Selection of Master or Slave
SW4 Dry Contact Mode Selection of Dry Contact
Mode
SW5 Installation Fan continuous operation
SW6 Heater linkage N/A
SW7 Ventilator linkage Selection of Ventilator link-
age
Vane selection Selection of up/down side
Vane
(Console)
Region selection Selection tropical region
SW8 Etc. Spare
For Multi V Models, DIP switch 1, 2, 6, 8 must be set OFF.
2. Outdoor Unit
In case that the products meet specific conditions, "Auto addressing" function can start automatically
with the improved speed by turning the DIP switch #3 of the outdoor unit and resetting the power.
* Specific conditions:
- All names of the indoor units are ARNU****4.
- The serial number of Multi V super IV (outdoor units) is after October 2013.
DIP switch 7 segment
Outdoor Unit PCB
14 Indoor Unit
Description
Wired/Wireless remote
Selection of Manual or Auto
operation Mode
Continuous operation Removall
Linkage Removal
Up side + Down side Vane
General model
Outdoor Unit DIP Switch
Setting Off Setting On
- -
- -
Master Slave
controller
Auto
-
- -
Working
Up side Vane
Only
Tropical model
- -
Default
Off
Off
Off
Off
Off
Off
Off
Off