Timer Recording; Location Of Controls - Panasonic PV-V4022A Operating Instructions Manual

Timer Recording

Timer Recording
1
1) Press PROG*.
2) Press to display program screen.
2
1) Set record DATE,
TIMER PROG. LIST
DATE START STOP CH
press to select:
13 SAT --:-- --:-- --
TODAY
1~31= one time,
SLP
SELECT START DATE
or DAILY= MON~ FRI,
SELECT : SET:
or WEEKLY= same time
END : PROG
each week and press .
2) Set remaining items,
press to select and
press to set START/ STOP times, CH (channel) or
LINE input (p. 9 of "Advanced Operations" book), and
tape speed (p. 3).
Press PROG to end programming.
3
To Enter More Programs
TIMER PROG. L I ST
DT START STOP CH SPD
Press to select and
13 2 : 00 P 3 : 20P 02 SLP
-- -- : -- -- : -- -- --
-- -- : -- -- : -- -- --
press to set an unused program.
-- -- : -- -- : -- -- --
Then repeat step 2.
CANCEL : ADD / DLT
SELECT : SET :
EXIT : PROG Or, press PROG to exit.
4
Press POWER off to set the timer recording. ("TIMER" lights on Multi Function Display.)
Review, Replace, or Clear Program
(Recording is not in progress)
a
1) Press PROG.
2) Press to select LIST.
b
Press to select
TIMER PROG. L I ST
DT START STOP CH SPD
desired program.
7 9 : 00A 12 : 00A 08 SP
8 10 : 00P 12 : 00P 02 SP
10 8 : 00P 9 : 00P 10 SP
SU 9 : 00P 10 : 00P L1 LP
CANCEL : ADD / DLT
SELECT : SET :
EXIT : PROG
c
To Replace program...
1) Press to display.
TIMER PROG. LIST
DATE START STOP CH
7 SUN 9:00A 12:00A 08
2) Repeat Step 2
TODAY
(above) to set new
SP
SELECT START DATE
programs.
SELECT : SET:
END : PROG
or
To Clear program...
Press ADD/DLT.
TIMER PROG. L I ST
DT START STOP CH SPD
-- -- : -- -- : -- -- --
8 10 : 00P 12 : 00P 02 SP
10 8 : 00P 9 : 00P 10 SP
SU 9 : 00P 10 : 00P L1 LP
CANCEL : ADD / DLT
SELECT : SET :
EXIT : PROG
d
Press PROG to end the programming.
Notes
• If you are using a Cable Box, VCR Timer Programming Channel (Step 2 above) must
be set to the Cable Box output channel and your Cable Box must be manually set to
the desired channel. The Cable Box must be left on.
• If a power interruption occurs while programming the timer, the timer program(s) may be
canceled. If "TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION" appears
on-screen, please re-enter the timer programs.
Important notes when using DSS receiver
• When recording programs via DSS receiver, DSS receiver must be left on.
• When recording programs via an antenna or cable, DSS receiver must be turned off.
Example
Today
8 9 31 1 2
SELECT / Selection Order
7
WEEKLY WEEKLY
(SAT)
(MON)
Cancel a Timer Recording
(Recording is in progress)
Press POWER and then STOP within 10
seconds to cancel the Timer Recording.
(The TIMER indicator goes out on Multi
Function Display.)
- 6 -

Location of Controls

Remote Control Buttons
VCR (mode)
(Enables VCR functions)
POWER
(Turns VCR off/on)
VCR/TV
6
(For TV or VCR mode)
DAILY
INPUT
(For LINE or channel)
WEEKLY
(SUN)
SPEED
(Changes tape speed)
EJECT
(Ejects tape)
COMMERCIAL SKIP/
ZERO SEARCH
( Starts COMMERCIAL SKIP/ Zero Search
ACTION
(Displays menu)
RECORD
(Records a program, etc.)
TAPE POSITION
(Locates tape position)
COUNTER RESET
(Resets counter to zero)
VOLUME +/-
(Adjusts TV volume)
Remote Control
EJECT button:
Press to eject tape. EJECT is not available during recording.
Front View of the VCR
POWER
Video
Input
Connector
CHANNEL
Audio Input
Connector TRACKING/ V-LOCK
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
(Adds or deletes a channel)
(Set search system /Tunes TV channel)
FAST FORWARD/SEARCH
(Fast forwards tape/ forward visual
)
(Rewinds tape/ reverse visual
PLAY, STOP, REW, and FF
function as
operation keys when menus
are displayed.
(Displays Timer Program screen)
(Displays still, frame by frame,
picture noise during Play and
Cassette Compartment
STOP/EJECT
/ Remote REWIND/
RECORD
Sensor SEARCH
Multi Function Display
- 7 -
TV (mode)
(Enables TV functions)
DISPLAY
(Displays VCR status)
NUMBER Keys
(Selects channel directly)
ADD/DELETE
SEARCH/ ENTER
PLAY
(Plays a tape)/
search)
REWIND/SEARCH
search)
STOP
(Stops tape)
Remote keys
PROGRAM
PAUSE/SLOW
or slow motion picture)
CHANNEL /
TRACKING/ V-LOCK
(Selects channel/ reduces
Slow mode)
PLAY
FAST
FORWARD/
SEARCH