Cable Box, Satellite Receiver, And Vcr Connections - Panasonic ShowStopper PV-HS2000 Operating Instructions Manual

Advanced Connections
Connecting a Cable Box,
Satellite Receiver, and VCR
to the Hard Disk Recorder
1. Connect an A/V cable from the AUDIO/VIDEO
OUT jacks on your cable box to the INPUT jacks
on the Hard Disk Recorder, matching like colors.
2. Connect an A/V cable from the AUDIO/VIDEO
OUT jack on your satellite receiver to the INPUT
jack on the Hard Disk Recorder, matching like
colors.
3. Connect an A/V cable from the OUTPUT jacks
on the Hard Disk Recorder to the AUDIO/VIDEO
IN jacks on your VCR, matching like colors.
4. Connect a second A/V cable from the OUTPUT
jacks on the Hard Disk Recorder to the AUDIO/
VIDEO IN jacks on your television, matching like
colors.
5. Connect an A/V cable from the OUTPUT jacks
on your VCR to the AUDIO/VIDEO IN jacks on
your television, matching like colors.
6. Attach your cable box and satellite receiver
controllers. See "Satellite Receiver and Cable
Box Controllers" on page 10.
7. Follow the C ~ E instructions on page 9 for
telephone connection, AC power connection,
and setup.
NOTES
• If your cable box does not have A/V OUT jacks,
connect an RF cable from the OUT jack to the
ANT/CATV IN jack on the Hard Disk Recorder.
• Refer to your TV, cable box, satellite receiver, or
VCR owner's manual for more information on
connecting to these components.
14
(continued)
VHF/UHF
IN
IN
Cable Box
IN OUT
R AUDIO
Satellite Receiver
IN
SERIAL
VCR
INPUT OUTPUT
R AUDIO L VIDEO R AUDIO L VIDEO
ANT/CATV
1
S-VIDEO S-VIDEO
IN
IN OUT
BLASTER
LINE
2
TV
R AUDIO L VIDEO
S-VIDEO
L VIDEO
R AUDIO L VIDEO VHF/UHF IN
S-VIDEO
VHF/UHF OUT
OR
IN
IN
OUT
R AUDIO L VIDEO
OUT
Hard Disk Recorder
AC-IN
TEL LINE
IR SERIAL
CONTROL
PORT