Interlogix POE303-EX-4P User Manual

POE303-EX-4P User Manual
Figure 1: POE303-MS
1. Introduction
1.1 Packet Contents
Thank you for purchasing IFS POE303-EX-4P- 1-Port Ultra
PoE to 4-Port 802.3af/at Gigabit PoE Extender. Open the
box of the POE303-EX-4P and carefully unpack it. The box
should contain the following items:

Industrial Power over Ethernet Extender x 1

User Manual x 1

RJ45 Dust Cap x 5

Wall Mounting Kit x 1
If any of these are missing or damaged, please contact your
dealer immediately; if possible, retain the carton including the
Figure 1.2: Application Diagram
P/N 1073227 • REV A • ISS 12SEP16
original packing material, and use them again to repack the
product in case there is a need to return it to us for repair.
1.2 Application Diagram
The POE303-EX-4P is designed as the repeater to forward
both Gigabit Ethernet data and IEEE 802.3at PoE power, thus
extending the range of PoE installation. With just plug and play
and without additional power supply and setup, one single
POE303-MS can increase the PoE range to 200m and drive up
four remote PoE IP cameras or wireless access point.
See Figure 1.2 below.
1.3 Key Features
Physical Port

5-port 10/100/1000BASE-T Gigabit RJ45 interface
- 1-port data + power input
- 4-port data + power output
Power over Ethernet

1-port data + power input
- Complies with ultra Power over Ethernet end-span
and mid-span PD
- Complies with IEEE 802.3at High Power over
Ethernet end-span / mid-span PD
- Supports PoE input power up to 60 W

4-port data + power output
- Complies with IEEE 802.3af / IEEE 802.3at Power
1 / 6