Advertisement
Table of Contents
- 1 Installation Kit Includes the Following Items
- 2 Remove the Dashboard Panel
- 3 Remove the Original Radio
- 4 Connect All of the Needed Wiring Harnesses
- 5 Place the Replacement Frame and the Original Dashboard Panel
- 6 Place the 2-Din Metal Bracket
- 7 Place the Headunit and Radio Trim
- Download this manual
Installation manual for:
Mitsubishi CZ3 2005 -->
Use this hole
2-DIN
Installation kit includes the following items:
* 1X 2-ISO 100 mm. metal bracket
* 1X Replacement frame
* 1X Radio trim
* 2X Mounting plates
* 2X Mounting spacers
* 4X Screws
* 2X Cushion
* 2X Radio removal keys
* Mount the plates.
CAW-1201-05
Kenwood DDX6029
We advice to use the following positions.
Other positions are also possible.
Use position 2 marked with a cross.
Use position 6 & 8 marked with an arrow.
Measured from left to right.
Kenwood DDX 7025
We advice to use the following positions.
Other positions are also possible.
Use position 1 marked with a cross.
Use position 14 & 16 marked with an arrow
Measured from left to right.
Advertisement
Table of Contents
Related Manuals for Kenwood CAW-1201-05
Summary of Contents for Kenwood CAW-1201-05
- Page 1 Use position 2 marked with a cross. Use this hole Use position 6 & 8 marked with an arrow. Measured from left to right. Kenwood DDX 7025 We advice to use the following positions. Other positions are also possible. Use position 1 marked with a cross.
- Page 2 2-DIN CAW-1201-05 Remove the CD player. This is tighten by Remove the dashboard panel at the loca- two screws tion of the arrows. Remove the original radio. Remove the original plastic mounting frame at the location of the arrow/ cross.
- Page 3 2-DIN CAW-1201-05 Place the 2-Din metal bracket. Place the headunit and radio trim.
Need help?
Do you have a question about the CAW-1201-05 and is the answer not in the manual?
Questions and answers