Drying And Cleaning The Boots; Disposal; Spare Parts - therm-ic Powered Heat Boot Integration System Mono button Bluetooth Instructions For Use Manual

ds Correct storage of the battery packs will
nt maintain their power level and life for longer.
eir
ng

DRYING AND CLEANING THE BOOTS

nd The drying temperature must not exceed 40 °C
/ 104 °F. Never dry the Boot Integration System
in a tumble dryer or on a radiator. For optimum
drying, we recommend the Therm-ic Refresher
we or the Therm-ic Dryer. For more information,
ty see the website www.therm-ic.com or your
at local specialist retailer.
ge, When the boots become dirty, clean them
er with a damp cloth or a clothes brush.
The boots must never be machine washed or
hand washed.
es
ng

DISPOSAL

ge When the boots reach the end of their life
s). cycle, dispose of them with their packaging
in accordance with applicable environmental
protection regulations and laws.
The batteries must be removed from the boots
and disposed of at a suitable collection point.
For further information, contact the relevant
local authority.

SPARE PARTS

If you wish to purchase spare parts at a later
date, you must specify the exact Therm-ic
model concerned. We recommend that you
take the part to be replaced to your retailer.
These instructions may be subject to change.
This product complies with all applicable laws
and directives.
13