Important Instructions For Use - therm-ic Powered Heat Boot Integration System Mono button Bluetooth Instructions For Use Manual

on Turning the device ON:
Press and hold down the function button (1.2)
nic (for approx. 3 seconds) to set the Therm-ic
Boot Integration System to the lowest heating
level. If the button is pressed for more than
N 6 seconds, the boots will go into lock mode and
switch off.
ur
Changing the heat setting:
ed Pressing the function button once (for approx.
1 second) will increase the heating setting
es (level 1, level 2 or level 3).
ng > Level 1: 1 flash, low heating setting.
an > Level 2: 2 flashes, medium heating setting.
nd > Level 3: constant light, high heating setting.
sts If lock mode is activated, you will first need to
unlock the system.
en
LOCK mode:
If the button is not pressed for 10 seconds, it
will go into lock mode. Pressing the function
button (for approx. 1 second) will unlock the
system. In lock mode the heat level selected is
still active.
Turning the device OFF:
To switch off the Therm-ic Boot Integration
System, press and hold the function button (1.2)
(for 3 seconds, until the heating level indicator
light switches off).

IMPORTANT INSTRUCTIONS FOR USE

• Charge the batteries before each use.
• When switching on the Therm-ic Boot
Integration System, do not leave them set
to level 3 for more than a few minutes;
continuous use at this setting risks raising
11