Dell Vostro 3888 Service Manual page 44

Steps
1. Insert the ODD assembly into the ODD slot.
2. Slide the ODD assembly until it snaps into place.
3. Route the power cable and data cable through the routing guides and connect the cables to the ODD.
Next steps
1. Install the Side cover.
2. Follow the procedure in After working on your computer.
Slim optical-drive bracket
Removing the slim ODD bracket
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
About this task
The following images indicate the location of the slim ODD bracket and provides a visual representation of the removal procedure.
Steps
1. Pry the ODD bracket to release from the slots on the ODD.
2. Remove the ODD bracket off the ODD.
44 Disassembly and reassembly