Dell Vostro 3888 Service Manual page 25

2. Remove the side cover.
About this task
The following images indicate the location of the 3.5-in. hard drive assembly and provides a visual representation of the removal
procedure.
Steps
1. Disconnect the data and power cables from the 3.5 in. hard drive.
2. Push the securing tab to release the hard-drive assembly from the chassis.
3. Remove the four 6-32 screws that secure the 3.5 hard drive.
4. Slide the hard-drive assembly away from the chassis.
Installing the 3.5-in. hard drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the 3.5-in, hard drive assembly and provides a visual representation of the installation
procedure.
Disassembly and reassembly 25