BABY DELIGHT Beside Me Dreamer Care Instructions page 7

3. Move the bedside sleeper close to the parent's bed and check the height of the
bedside sleeper compared with the mattress on the bed. The side support of the
sleeper should always be placed close to the parent's mattress and the mattress
should always be aligned with the height of the side support for restraint of the
sleeper.
WARNING:
IN THE BEDSIDE SLEEPER MODE THE TWO LEGS OF THE BEDSIDE SLEEPER
SHOULD ALWAYS BE ADJUSTED TO THE SAME HEIGHT.
4. In order to attach the bedside sleeper to the parent's bed in bedside sleeper
mode, use the attached pair of anchors provided.
5. Slide the anchors between the top mattress and the base across the opposite
side of the bed using a back and forth 'sawing' motion and at the same time pulling
downward until the straps and anchor plates are in the desired position.
WARNING:
6. Tighten the loop by pulling the belts firmly. Adjust the anchor straps separately
until the bedside sleeper is firmly in contact with the parent's mattress.
NEVER USE THIS
PRODUCT IN
BEDSIDE SLEEPER
MODE WITHOUT
THE ANCHOR
PLATES SECURELY
ATTACHED TO THE
ADULT BED
ACCEPTABLE BED FRAME
MATTRESS, BOXSPRINGS &
Bedside Sleeping Mode Continued
ENSURE THE ANCHORS ARE STRAIGHT.
IN-LINE
FRAME ALIGNED
UNACCEPTABLE BED, MATTRESS,
BOXSPRING & FRAME NOT IN-LINE
FRAME EXTENDED
7