TC-Helicon GO TWIN Quick Start Manual

Quick Start Guide
GO TWIN
High-Definition 2-Channel Audio/MIDI Interface for Mobile Devices
Getting started
Connect GO TWIN to a computer, phone or
tablet using the included cables. If your device does
not provide bus power, insert a pair of AA batteries
or connect a 5 V power supply (not included).
Connect microphones, instruments or
line-level sources to the inputs using XLR or
1/4" cables.
Plug a pair of headphones into the HEADPHONE
output or connect a pair of speakers to the LINE OUT
jacks. Set both LEVEL controls to minimum to start.
To enable phantom power move the 48 V
power switch to the ON position. The 48 V LED on
the front panel will light blue.
While speaking into the microphone or playing
your instrument, turn up the GAIN wheel for the
relevant input. Repeat the process for the other
source/input if necessary. The SIG LED should light
green to indicate a signal present. If either SIG LED
lights red, turn that channel's GAIN wheel down to
avoid clipping.
Move the DIRECT MONITOR switch to the ON
position to hear dry input audio. Move to the OFF
position to monitor processed audio.
Connect MIDI devices to the mini 2.5mm input
and output jacks using the included adapter cables.
Download your favorite TC Helicon app to
begin experimenting with effects.