Table of Contents
Advertisement
Available languages
Available languages
IMPORTANT ADDENDUM for instruction manual Art. 80 28 90:
In order to use all functions properly, we suggest reading the detailed instruction
manual provided with this product.
Preparations
Completely charge the batteries using the supplied USB cable (11). The LED
indicator (7) flashes during charging. When charging is finished, the LED
indicator shines permanently.
Insert a microSD card (not included) with sufficient
free storage capacity into the microSD card slot (8)
at the right temple arm. The electric contacts have
to face towards the printed side of the control unit.
The card has to snap in. You may use the tip of
your fingernail when inserting the card.
Power on
Press and hold the on/off key (3) for approx. 1 second. The LED indicator (7)
shines. The DVR sunglasses are switched on.
Approx. 10 seconds after switching on, the DVR sunglasses are ready for
use.
Taking Photos
Shortly press the photo key (5). The LED indicator (7) goes off for one second
and turns on again to indicate standby mode. A photo has been taken. It is
stored in JPG format on the installed memory card.
Recording Videos
Shortly press the video key (4). Recording of the video sequence starts. The
LED indicator (7) flashes in regular intervals.
Press the video key once more to stop shooting. The LED indicator lights
permanently again.
Transfer Photos and Videos to the Computer
Switch off the DVR sunglasses!
Use the mini USB cable (11) to connect the DVR sunglasses to the PC.
A few seconds later the DVR sunglasses are detected as a USB mass storage
device. It will be integrated as a new removable drive in the operating system
and the files can be transferred to the PC.
Alternatively, you can put the microSD into a suitable card reader which is
connected to the PC. This way, you directly can transfer the files from the
microSD card to the PC.
DVR Sunglasses – Art.-No. 80 28 90
Advertisement
Table of Contents
