Table of Contents
Advertisement
Available languages
Available languages
After stopping recording, allow the device to save the
film sequence. This process can take a few seconds.
Before you continue recording, wait until the LED
indicator lights up again.
For each recorded video sequence a new, separate AVI
file is created and stored to the microSD card.
When there is no more sufficient storage capacity
available on the microSD card or when the battery
performance is low, the recording in progress is
automatically saved before the power goes off.
One minute of video allocates approx. 40 MByte space
on the microSD card (the actual allocated capacity
depends on the video content).
Charging the Batteries
The DVR sunglasses include a built-in battery. This can
be charged as follows:
Switch off the device. Then use the mini USB cable to
connect the DVR sunglasses to a free USB port of your
switched on computer. Charging the battery auto-
matically starts.
Alternatively, you can a USB charger (not included).
Connect the mini USB cable (11) with the mini USB
interface (6) of the sunglasses and with the USB
charger. Plug the USB charger into a power outlet.
Charging the battery starts. The LED indicator (7) is
flashing during charging. When charging is finished, the
LED indicator shines permanently.
Using
19
Advertisement
Table of Contents
