YILMAZ Luna Machinery KD 310 Manual
  1. Manuals
  2. Brands
  3. YILMAZ Manuals
  4. Cutter
  5. Luna Machinery KD 310
  6. Manual

YILMAZ Luna Machinery KD 310 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
800 W 50 Hz
KD 310
230 V AC N PE
800 W 50 Hz
KY 310
230 V AC N PE
KY KD 310 -
D
d
3000
D = 300 mm
dev/dak.
d = 30 / 32 mm
RPM
3000
D = 300 mm
dev/dak.
d = 30 / 32 mm
RPM
TECHNICAL FEATURES
--
a : 50 mm
b : 130 mm
kg
W = 63
L = 52
26
29
H = 48
W = 63
L = 52
26
29
H = 48
kg
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Luna Machinery KD 310 and is the answer not in the manual?

Questions and answers

Related Manuals for YILMAZ Luna Machinery KD 310

Summary of Contents for YILMAZ Luna Machinery KD 310

  • Page 1 KY KD 310 - TECHNICAL FEATURES 3000 W = 63 800 W 50 Hz D = 300 mm KD 310 L = 52 dev/dak. d = 30 / 32 mm 230 V AC N PE H = 48 3000 W = 63 800 W 50 Hz D = 300 mm a : 50 mm...
  • Page 2 CUTTING DIAGRAM...
  • Page 3 DIMENSIONS...
  • Page 4 PART LIST RESİM-FIGURE-РИСУНОК 1...
  • Page 5 RESİM-FIGURE-РИСУНОК 2...
  • Page 6 RESİM-FIGURE-РИСУНОК 3...
  • Page 7 STOK KODU / CODE ADET / QTY STOK KODU / CODE ADET / QTY номер ПОРЯДОК КОД КОЛИЧЕСТВО номер ПОРЯДОК КОД КОЛИЧЕСТВО 2TU012610-0151 2TU011110-1697 1PL030000-0024 1PL010000-0049 3UA250030-0009 3UA770030-0013 1PL010000-0011 2TU011110-0146 3UA030030-0001 1SK010000-0002 2TU012610-0020 2TU011710-0004 2TU011110-0145 1SC021000-0027 2TU012610-0079 (KD 310) 3UA250030-0002 2TU012610-0087 (KY 310) 1PL010000-0057 2TU011441-1542 (KY 310)
  • Page 8 HOLE DIMENSIONS FOR CONVEYOR CENNECTION...
  • Page 9 PARÇA RESİM STOK KODU / CODE FIGURE PART NO ПОРЯДОК КОД РИСУНОК НОМЕР 3UA250030-0009 1PL010000-0011 3UA030030-0001 2TU012610-0020 2TU011110-0145...
  • Page 10 2TU012610-0079 (KD 310) 2TU012610-0087 (KY 310) 3UA040030-0013 (KY 310) 3UA090030-0004 2TU012610-0019 3UA770030-0020 3UB030030-0001...
  • Page 11 3UB030030-0002 1PL010000-0107 1EL010000-0011 1EL020000-0022 (KD/KY 310B) 1EL040000-0500 (KD/KY 310B)
  • Page 12 1EL190000-0400 (KD/KY 310B) 1EL020000-0012 (KD/KY 310B) 1EL180000-0001 1PL010000-0048 2TU012610-0081...
  • Page 13 1PL010000-0049 3UA770030-0013 1SK010000-0002 2TU011710-0004 3UA250030-0002...
  • Page 14 1PL010000-0057 1YY021000-0004...

  • Page 15: Table Of Contents

    ENGLISH CONTENTS 1. General information 1.1. Introduction 1.2. Service Information 2. Safety 2.1. Safety Symbols and Their Meanings 2.2. Accidents Prevention 2.3. General Safety Information 3. Machine’s Description 4. Transport of the Machine 5. Installation of the Machine 5.1. Preparation 5.2.

  • Page 16: General Information

    The technical drawings and details contained in this manual constitute a guide for the operator. 1.2. Service Information In case of any technical problem please contact your nearest YILMAZ dealer, or YILMAZ head office through the above mentioned phone, fax or e-mail address.
  • Page 17 AUTHORIZED TECHNICAL SERVICE CENTER ADDRESS TAŞDELEN MH. ATABEY CD. No 9 34788 ÇEKMEKÖY – İSTANBUL / TÜRKİYE 0216 312 28 28 Pbx. 0216 484 42 88 E-mail service@yilmazmachine.com.tr / sales@lunamac.com.au www.yilmazmachine.com.tr / www.lunamac.com.au For minimize the documantation, It is wery necessary to mention below details at the agreements signed with suppliers and dealers of the purchased machines ...

  • Page 18: Safety

    2. SAFETY 2.1. Safety Symbols and Their Meanings Ensure safe working position, always keep your Read the user guide balance. Wear ear protectors Elektrical excitation Wear safety goggles Don’t place your hands between parts in motion.. If the power cable should be damaged during operation, don't touch and unplug it.

  • Page 19: Accidents Prevention

    2.2. Accidents Prevention 2.2.1 Our machines are manufactured in accordance with CE safety directives, which cover national and international safety directives. 2.2.2 It is the task of the employer to warn his staff against accident risks, to train them on prevention of accidents, to provide for necessary safety equipment and devices for the operator’s safety.
  • Page 20 2.3.4 Do not leave any things on the machine. 2.3.5 Don’t use any materials other than those recommended by the manufacturer for cutting operations on the machine. 2.3.6 Ensure that the work piece is clamped appropriately by the machine's clamp or vice 2.3.7 Ensure safe working position, always keep your balance.

  • Page 21: Machine's Description

    3. MACHINE’S DESCRIPTION Portable mitre cutting machines designed for straight and angle cutting of PVC and Aluminium profiles.  Positive locating pin lock at 0-15°- 22, 5°- 30°- 45°- 60° - 75° intermediate angles set with a table lock.  Cutting on upper table.

  • Page 22: Installation Of The Machine

    5. INSTALLATION OF THE MACHINE 5.1 Preparation 5.1.1 The machine size and weight measurements, given the technical specification sheet.The ground, where the machine will be placed, should be even, solid enough to bear the weight of the machine. 5.1.2 The machine should be located approx. 50 cm away from the rear wall. The power connection plug of the machine is located on the rear side of the machine.

  • Page 23: Machine's Safety Information

    5.2.5 Check the supply voltage. The source voltage must be in accordance with the data on the machine’s label. 5.2.6 After electrical connection is made, machine must be operated in idle running and it must be controlled whether rotation directions of cutting tools are correct or not and if the rotation direction is wrong, appropriate connection must be made.

  • Page 24: Operation

    7. OPERATION 7.1 Preparation 7.1.1 Degrease and dry the machine table. Especially ensure that the holding grips and handles are clean and dry 7.1.2 Clean all surfaces of the machine from chip and foreign particles. Use eye glasses for protection. 7.1.3 This machine can process on products manufactured from rigid plastic and aluminum materials that don’t include iron alloy.

  • Page 25: Angular Cutting

    7.2.4 Remove the part by opening the clamp. Don’t operate the saw while it touches the work piece. The saw must be operated only when the head is in the top position. On the bottom plate during the cutting process, the remaining portion of the saw above is completely closed .

  • Page 26: Maintenance, Service And Repair

    7.4.3 Adjust the desired angle according to the degree lable. (FIGURE 1 NO.30) and fix the head by tightening the pipe. 7.3.6 Carry out the cutting operation after. Angle cutting is done, make sure that cutting unit is fixed Tilted cutting is possible only with the head at 90°. Make the 90°...

  • Page 27: Changing The Cutting Tool

    8.2 Changing the cutting tool 8.2.1 Cut the electric connection of the machine. 8.2.2 Remove the upper casing part. (FIGURE 2 NO.129) 8.2.3 Group of top table (FIGURE 2 NO.123), pull tightening (FIGURE 1 NO.127) loosening and remove it. 8.2.4 Unscrew the M8 screw (FIGURE 2 N0.140) with a hexagonal key. (FIGURE 2 N0.149) 8.2.5 Remove the part (FIGURE 2 NO.139) in this order.

  • Page 28: Warranty Conditions

    9. WARRANTY CONDITIONS YILMAZ Machine Industry and Trade Limited Company guarantees that all machines have been tested and conform to the international standards. During this period: - Any repair and replacement effected at our workshop is completely free of charge (only transport costs are at customer’s charge).

This manual is also suitable for:

Luna machinery ky 310

Table of Contents