7.4. Angular adjusment and correctness control of saw blade and set square 7.5. Adjust of belt tension 8. Maintenance, Service and Repair 8.1. Starting work 8.2. Maintenance at the end of working day 9. Troubleshooting Guide Yılmaz PVC ve Alm. İşleme Makineleri Ltd.Ştd MK 420...
* In case of any technical problem please contact your nearest YILMAZ dealer, or YILMAZ head office through the above mentioned phone, fax or e-mail address. * Technical labels with the model description of the machine are fixed onto the front side of each machine.
Ø It has the ability to cut in shape. Ø Machine working direction is adjustable. Ø The cuttinng in 45 degrees angles is by switchblade and the other angles free cutting is possible. Yılmaz PVC ve Alm. İşleme Makineleri Ltd.Ştd MK 420...
2.2 kW 50 Hz 2.2 kW 50 Hz d= 30 / 32 mm d= 30 / 32 mm 3000 dev/dak 3000 dev/dak MK 420 MK 420 63x98x140 63x98x140 400 V AC 3 PE 400 V AC 3 PE D=420 mm .
The DANGER WARNING above warns you against specific dangers, and definitely requires the text to read. Not observing may result in serious bodily injury. Please read the user’s manual carefully before using the machine or carrying out maintenance. Yılmaz PVC ve Alm. İşleme Makineleri Ltd.Ştd MK 420...
The machine cannot be operated in any way for purposes other than those described herein. Otherwise, the manufacturer shall not be deemed responsible for any damages or injuries. And such circumstances would lead to the termination of the warranty. Yılmaz PVC ve Alm. İşleme Makineleri Ltd.Ştd MK 420...
3.3.9. Ensure safe working position, always keep your balance. 3.3.10. Don't leave anything on the machine. 3.3.11. Keep your working place always clean, dry and tidy for accident prevention and safe operation. Yılmaz PVC ve Alm. İşleme Makineleri Ltd.Ştd MK 420...
Page 15
Damaged protective parts and equipment have to be replaced or repaired properly (by the manufacturer or dealer). 3.3.18. Don’t use machines with improper functioning buttons and switches. 3.3.19. Don’t keep flammable, combustive liquids and materials next to the machine and electric connections. Yılmaz PVC ve Alm. İşleme Makineleri Ltd.Ştd MK 420...
5.3 Your machine operates under 400V 50 Hz power supply. Let the electric installation carry out by a qualified electrician. 5.4 Check the rotation direction of the saw after making the electric connection. Yılmaz PVC ve Alm. İşleme Makineleri Ltd.Ştd MK 420...
6.6 Keep foreign materials away from the working area of the machine, keep away from the machine’s moving parts. 6.7 Don’t use the machine for improper purposes (for working of iron and ferrous metals) Yılmaz PVC ve Alm. İşleme Makineleri Ltd.Ştd MK 420...
* The distance that the saw raises or lowers can be adjusted with the aid of washers (Figure 2 NO.50) on the front side of the frame and with the aid of measurement ruler (Figure 2 NO.52). Yılmaz PVC ve Alm. İşleme Makineleri Ltd.Ştd MK 420...
IMPORTANT: Install the saw appropriate to direction of rotation. Label, indicating direction of rotation is placed on the right hand side of the machine. Do not forget the tools, used for changing the saw, inside or on the machine after completing the change process. Yılmaz PVC ve Alm. İşleme Makineleri Ltd.Ştd MK 420...
PICTURE 5 till given dimension (20 mm). Check the tension of the belt by pressing on the belt with your finger. Stretching distance of the belt should be approximately 10 mm. PICTURE 5 Yılmaz PVC ve Alm. İşleme Makineleri Ltd.Ştd MK 420...
1. Control electric power supply. Verify correct connection of cables. 2. Saw is rotating reversely. 1. Control the electrical connection. 3. Quality of Cutting is bad 1. Change the saw. Cutting blade might be worn. Yılmaz PVC ve Alm. İşleme Makineleri Ltd.Ştd MK 420...
Need help?
Do you have a question about the MK 420 and is the answer not in the manual?
Questions and answers