Motcom T5622 Manual page 10

6864227V01-A_EN.fm Page 10 Thursday, April 6, 2006 2:37 PM
Time-out Timer
The Time-out Timer feature helps extend battery life by
preventing the radio from accidentally transmitting. The
radio will emit a continuous warning tone after
pressed for 60 continuous seconds and will stop
transmitting.
Keypad Lock
The keypad lock disables the \ , ]
buttons. It also disables the scan function but allows
use of the J , M , ^ buttons and and to turn the
radio on and off.
1.To lock or unlock the keypad press and hold the
button for three seconds. When the radio is locked
f will show in the display.
Backlight
Your radio has a backlight which turns on when a
button is pressed and turns off automatically 4 seconds
after you last pressed a button.
10
ALERTS
Channel Busy Indicator
The red LED will flash twice per second to indicate that
is the channel is in use.
M
Call Tone
Your radio can transmit different call tones to other
radios, alerting users on the same channel and code
that you are about to talk. Your radio has 10 call tones
and [
to choose from. Setting the call tone to 0 disables
1.To set your call tone press
2.Press ] and [ to change and hear call tones
while the setting number is flashing.
3.Press M to set new call tone.
\
Talk Confirmation Tone
When you turn on this feature, your two-way radio
transmits a chirp when you finish transmitting and
release the . It's like saying 'Roger' or 'Over', and
M
lets others know you've finished talking.
1.To enable or disable this tone, press and hold
you turn your radio on.
2.When the roger beep is enabled
display.
3.When you release the M button you will hear the
talk confirmation tone.
^.
\ until E Is displayed.
] as
! will show in the