Panasonic PT-52DL10 Operating Instructions Manual page 21

Power (ON / OFF) button
LIGHT
POWER
ASPECT
MUTE TV/VIDEO
CH
Remote Control Sensor
Note:
Even when the main power switch (FUNCTION SWITCH) is turned off, and the POWER indicator is not lit, the projection
TV is not completely cut off from the power if the power cable is still plugged in.
POWER
POWER
R-STANDBY LAMP TEMP
G-POWER ON
POWER
Push the Power button to turn the projection TV ON,
from Stand-by mode.
The projection TV must first be switched on at the wall
outlet and the Power switch.
The Power Indicator will blink Green.
The Power Indicator will become Green.
Example: The screen above is display for a while after
the projection TV is turned on. (Setting
condition is an example.)
Push the Power button to turn the projection TV to
Stand-by mode.
The Power Indicator will become Orange.
The Power Indicator will become Red.
The Power Indicator
LED
No illuminated
Red
Green
Green blink
(approximately 10 seconds after)
Orange blink Power – OFF (by the remote control)
(approximately 90 seconds after)
Power ON / OFF
Approximately 10 seconds
CH123
STEREO
MONO
NORMAL
Approximately 90 seconds
ACTION
Power – OFF
Stand – by
Power – ON
Power – ON
SAP
21