Download Print this page
Triumph Sports USA 45-6074 Manual

Triumph Sports USA 45-6074 Manual

4-piece table tennis table
Hide thumbs Also See for 45-6074:

Advertisement

Quick Links

Item# 45-6074
4-Piece Table Tennis Table
Please keep this instruction manual for future reference
If you have any problems with your new product,
please contact Triumph Sports USA at 1-866-815-4173,
or e-mail us at csr@triumphsportsusa.com
for any technical support or warranty issues.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 45-6074 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Triumph Sports USA 45-6074

  • Page 1 4-Piece Table Tennis Table Please keep this instruction manual for future reference If you have any problems with your new product, please contact Triumph Sports USA at 1-866-815-4173, or e-mail us at csr@triumphsportsusa.com for any technical support or warranty issues.
  • Page 2 Limited 90-Day Triumph Sports USA, Inc. Warranty All Triumph Sports USA, Inc. (TSU) games have a limited 90-day from date of purchase warranty. This warrants the retail purchaser for any TSU game purchased to be free from any defect in materials and construction for 90 days from the date of purchase. The only exceptions to the warranty include main frames, tabletops, playing surfaces, batteries or tools.
  • Page 3 Parts List Table Tennis Ball Table Tennis Paddle Table Surface-A Table Surface-B 2pcs 2pcs 2pcs 2pcs Linkage Tube Linkage Tube Curved Outer Leg Curved Inner Leg with Stop Bracket 2pcs 2pcs with Cap 2pcs with Cap 2pcs Side Apron End Apron Bracket Gravity Lock (1.35m) 2pcs...
  • Page 4 Assembly Tips: Attention: If you are using an electric screwdriver in the assembly, please set at low torque and do not over tighten the hardware. When assembling individual parts, loosely tighten screws until all screws are inserted, then tighten completely. Assembly Instructions NOTE: We recommend that two adults work together to assemble this game.
  • Page 5 Step 2 Place one Curved Outer Leg with Cap (#5) on the player end of the table half and one Curved Inner Leg with Cap (#6) on the center end of the table half. Attach the Leg Bracket (#19 & #20) to the Curved Outer Leg (#5) and the Curved Inner Leg (#6) using Screws (#A7).
  • Page 6 Step 3 Attach one end of the Linkage Tube (#8) to the inside of the Curved Outer Leg (#5) using one Bolt (#A2), two Washers (#A4), one Spacer (#A5) and one Nut (#A6). See FIG. 3A. Repeat the same for the other end of this Linkage Tube, only attaching it to the outside of the Curved Inner Leg (#6).
  • Page 7 Step 4 Place the Plastic Corner (#17) flush with table corner and attach using three Screws (#A1) per Corner. See FIG. 4A. Place the End Apron (#11) between the corners and flush with the table edge at the Player end of table using six Screws (#A1) per End Apron. See FIG. 4. Place the Side Apron (#12) flush with table edge at the side of the table using five Screws (#A1) per Side Apron.
  • Page 8 Step 5 Make sure the Outer Leg Caps (P1) and Inner Leg Caps (P2) are installed into the ends of the leg. Then place the Wheel (#18) into the Legs. See FIG. 5. With the logo upside-down, attach the Plastic Panel with Frame (#21) to the Curved Inner Leg (#6) using two Bolts (#A3) and two Washers (#A4) per frame.
  • Page 9 CAUTION: Two adults are recommended to flip the table as shown. 1.Lift the table off the ground. 2.Turn the table over, using caution to clear the legs as you turn. 3.Place the table on all four legs at the same time. DO NOT HOLD CABINET...
  • Page 10 Step 6 Before turning the table over, make sure to push the Curved Inner Leg (#6) towards the center of the table in order to fix leg in right position. NOTE: Two adults are required to turn this table over. One person should stand at each center of the table and turn the table over completely so that it rests on its legs.
  • Page 11 Step 7 Attach one Gravity Lock (#10) to the Curved Inner Leg (#6) using one Bolt (#A2), two Washers (#A4), one “T” Washer (#22) and one Nut (#A6) per Gravity Lock. See FIG. 8A. HARDWARE AFTER ASSEMBLY...
  • Page 12 Step 8 Attach the Net Post (#16) at the middle of the table and slide the net over the post. Stretch the Net (#15) across the center of the table and slip the net over the post on the opposite side.
  • Page 13 Step 9 Engage the Wheels Lock. Folding the table - First fold the side of the table without the Net Post. Hold the end securely and lift the table. Make sure the Gravity Lock (#10) is locked. Repeat for the other side. Attach the Safety Strap Long and short (#13, #14) together to prevent the sides from falling.