Whirlpool MW87OOXL Use And Care Manual page 12

7.
8.
9.
Touch a Number Pad for
the Cook Power you
want in the first cooking
cycle.
The COOK CYCLE 2 Signal Light will come
on and the Display will show 4 0's.
Touch COOK CYCLE 2.
(Option: Touch START if
cookinginonlyone
cycle after defrosting.)
1 &Touch COOK POWER.
(Option: Skip to step 12
if you want the second
cycle to cook at high
power.)
The Display WIII show the numbers you
touched in the order you touched them.
This example shows 4 minutes. 30 seconds.
Touch Number Pads for
the cooking time you
want in the second
cooking cycle.
The COOK POWER Signal Light will come on
and the Display will show 2 O's
The Display WIII show what you touched
This example shows 40% of full power.
11
.Touch a Number Pad
for the Cook Power
you want in the
second cooking
cycle.
12.
Touch START.
For a third cooking
cycle, touch COOK
CYCLE 3 and repeat
steps 9,10 and 11.
12
d
count
own
--
When you touch START, the DEFROST CYCLE
Signal Light will stay on. All other Signal
Lights will go off
The Display counts down the time to show
how much time is lef in the defrost cycle.
When the defrost time ends, the microwave
oven automatically lets the food stand for
the same
amount
of time used for
defrosting. The Display counts down the
standing time. During the countdown, the
oven will be dark ond the fan will be off No
other Signal Lights will be on.