Using your microwave oven
Microwave oven controls
There ore three parts in the control
section.
-The
Digital
Display/Clock,
and Signal
Lights
-Command
Pads
-Number
Pads
Instructions
for each control are covered
on the
following
pages. Read them carefully.
When you first plug in the oven, the Display
will show 88:88. If, after you set the Clock
(page
6), the Display
again
shows all 8's, it
means
your electricity
was off for a while.
Reset the Clock.
Digital
display/clock
and signal
lights
When you are not
Pads you touched.
Command
pads
what order. A few
examples:
-CLOCK
SET tells
the oven you are
oven to start. See
pagel6for
information
on the tone you hear
when touching
any pad.
Each Command
Pad (except
START and
CANCEL] lights a Signal Light.The Signal Light
comes on when you touch the Command
Pad.
While the oven is running, a Signal Light
(or lights) will be on to show what the oven
is doing.
Number
pads
Need help?
Do you have a question about the MW8520XP and is the answer not in the manual?