Whirlpool MW1500XP Use & Care Manual page 11

m
10. Touch START.
d count
own
d
count
own
BLEP
BEEP
BEEP
The Display will show what you
touched. This example shows 70%
of full power.
When you touch START, both COOK
1 & 2 Indicator Lights come on to
show you that the oven is cooking in
the first of two Cook Cycles. The
Cook Power Indicator Light will go
off. The oven will cook in ihe Cook
Power you selected.
The Display will count down the
time to show you how much time is
left in the first Cook Cycle.
When the Cook 1 cycle ends, you
will hear a beep and the oven will
automatically start cooking in the
Cook 2 cycle.
The COOK 1 Indicator Light will go
off and the COOK 2 Indicator Light
will stay on.
The Display counts down the time
to show you how much time is left in
the Cook 2 cycle.
When the Cook 2 cycle ends. you
will hear 3 beeps. When the beep-
ing stops, the Display will show
the time of day.
For best cooking results, remember to provide a standing time after defrosting
In Cook Cycle 1 and before cooking in Cook Cycle 2.
I
Checking or changing cooking time or Cook Power settings
To double check settings:
1 Touch the command pads for the settings you want to check. The cooking time or Cook
Power settings you touched in for those pads will show in the Display.
2 Touch START to start the oven or to return the Display to show what the oven is doing.
To change the cooking times during operation:
1 Touch CHANGE/CANCEL Pad once. The oven will go off and the Display will show a
colon. Touch in the new cooking time, then touch START. The oven will continue cooking
for the new time.
To change Cook Powers during operation:
1 Touch COOK POWER Pad once, The Display will show the Cook Power for the Cook Cycle
in operation. Touch in the new Cook Power, then touch START. The oven will use the new
Cook Power for the rest of the Cook Cycle.