Interrupting Cooking - Whirlpool MH8150XJ Use And Care Manual

C
ONTROL PANEL FEATURES
Audible signals
Your microwave oven comes with audible
signals that can guide you when setting and using
your oven:
• A programming tone will sound each time
you touch a pad.
• One long tone signals the end of a Kitchen
Timer countdown.
•
Four tones signal the end of a
cooking cycle.
•
Two quick, short tones sound once
every minute for the first 15 minutes after an end-
of-cooking signal as a reminder if the food has
not been removed from the oven.
•
Two quick, short tones will sound while
entering and exiting from a hidden feature (for
example, Child Lock).
•
Three tones sound if you have
made an incorrect entry.
To disable the programming tone:
TOUCH
1
and hold for 5 seconds
To turn the programming tone back on:
TOUCH
1
and hold for 5 seconds
To disable all audible signals except the
end-of-timer signal:
TOUCH
2
and hold for 5 seconds
( .)
CONT
To turn signals back on:
TOUCH
2
and hold for 5 seconds
NOTE: Two tones will sound when audible signals
are turned on or off. This will only work when the
oven is in standby mode.

Interrupting cooking

You can stop the oven during a cycle by opening
the door. The oven stops heating and the fan stops,
but the light stays on. To restart cooking, close the
door and
TOUCH
START
ENTER
If you do not want to continue cooking:
• Close the door and the light goes off.
OR
TOUCH
•
OFF
CANCEL
NOTE: Before setting a function, touch
OFF/CANCEL to make sure no other
function is on.
GETTING TO KNOW YOUR MICROWAVE OVEN
11 11