Cleaning the grease filter
The grease
filter should be removed
and cleaned
often, at least once a month. (Note: If
your microwave
hood combination
has an extra charcoal
filter from the Recirculating
Kit
(RCH6000/788000],
it should be replaced
every12
months.]
1. For your personal
safety, turn
off the electric
power at the
main power supply.
To replace,
insert the front filter
edge
into the back of the
light lens, Push up the back
edge
of the filter, then pull out
the two filter fasteners to
secure the filter.
2. Push in the two filter fasteners
at the back edge
of the filter.
3. Soak filter in hot water and a
Pull down on the back edge
mild detergent.
Scrub and
of the filter frame. Slide the
swish to remove
embedded
front edge
out of the light lens.
dirt and grease.
Rinse well
and shake to dry. Do not use
ammonia
or place
in a
dishwasher.
The aluminum
will darken.
5. Turn the power
back on at the
main power supply
6. Do not operate
the hood
without
the filter(s)
in place.
13